Brennen von DL-DVD mit Nero 6.601 und Liteon SOHW 1673s klappt net

Diese Seite verwendet Cookies. Durch die Nutzung unserer Seite erklären Sie sich damit einverstanden, dass wir Cookies setzen. Weitere Informationen

  • Brennen von DL-DVD mit Nero 6.601 und Liteon SOHW 1673s klappt net

    Moin !
    Habe genau oben genanntes Problem und möchte gerne wissen, woran es liegt. Da will man einmal ne DL-DVD brennen und prompt wird sie verheizt. :mad:
    Es handelt sich um einen Traxdata 2,4x und 8,5 GB DL Rohling. Nero bricht nach kurzer Zeit ab und wirft folgende Log aus:

    Windows XP 5.1
    IA32
    WinAspi: -
    ahead WinASPI: File 'C:\Programme\Nero\Nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 28.07.2004 16:51:12
    Nero Version: 6.6.0.1
    Recorder: <LITE-ON DVDRW SOHW-1673S>Version: JS01 - HA 1 TA 1 - 6.6.0.1
    Adapter driver: <nvatabus> HA 1
    Drive buffer : 2048kB
    Bus Type : via Inquiry data (1) -> ATAPI, detected: ?
    Connected to MMC as unknown drive with class-nr : 1
    Drive is autodetected - recorder class: Std. MMC recorder
    CD-ROM: <LITE-ON DVDRW SOHW-1673S>Version: JS01 - HA 1 TA 1 - 6.6.0.1
    Adapter driver: <nvatabus> HA 1

    === Scsi-Device-Map ===
    DiskPeripheral : ST3120026AS 3.05 si3112r Port 0 ID 0 DMA: Off
    CdRomPeripheral : LITE-ON DVDRW SOHW-1673S nvatabus Port 1 ID 1 DMA: Off
    DiskPeripheral : QUANTUM FIREBALL CR13.0A nvatabus Port 1 ID 2 DMA: Off

    === CDRom-Device-Map ===
    LITE-ON DVDRW SOHW-1673S E: CDRom0
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 83886080 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 1023MB (1048048kB)
    Free physical memory: 556MB (569504kB)
    Memory in use : 45 %
    Uncached PFiles: 0x0
    Use Static Write Speed Table: 0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    2.5.2006
    ISO Zusammenstellung
    18:02:04 #1 Text 0 File Isodoc.cpp, Line 6165
    Iso document burn settings
    ------------------------------------------
    Determine maximum speed : FALSE
    Simulate : FALSE
    Write : TRUE
    Finalize CD : TRUE
    Multisession : FALSE
    Burning mode : DAO
    Mode : 1
    ISO Level : 1 (Max. of 11 = 8 + 3 char)
    Character set : ISO 9660
    Joliet : TRUE
    Allow pathdepth more than 8 directories : TRUE
    Allow more than 255 characters in path : TRUE
    Write ISO9660 ;1 file extensions : TRUE

    18:02:04 #2 Text 0 File Reader.cpp, Line 127
    Reader running

    18:02:04 #3 Text 0 File Writer.cpp, Line 122
    Writer LITE-ON DVDRW SOHW-1673S running

    18:02:04 #4 ISO9660GEN -11 File geniso.cpp, Line 3286
    First writeable address = 0 (0x00000000)

    18:02:04 #5 Text 0 File Burncd.cpp, Line 3117
    Turn on Disc-at-Once, using DVD media

    18:02:05 #6 Text 0 File DlgWaitCD.cpp, Line 256
    Last possible write address on media: 4173823 (927:30.73, 8151MB)
    Last address to be written: 4132351 (918:18.01, 8070MB)

    18:02:05 #7 Text 0 File DlgWaitCD.cpp, Line 268
    Write in overburning mode: NO (enabled: CD)

    18:02:05 #8 Text 0 File DlgWaitCD.cpp, Line 2309
    Recorder: LITE-ON DVDRW SOHW-1673S, Media type: DVD+R9 Double Layer
    Disc Manufacturer ID: RICOHJPN, Media Type ID: D00, Product revision number: 1
    Disc Application Code: 0, Extended Information Indicators: 0

    18:02:05 #9 Text 0 File DlgWaitCD.cpp, Line 430
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    18:02:05 #10 Text 0 File ThreadedTransferInterface.cpp, Line 844
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 ()
    2 indices, index0 (150) not provided
    original disc pos #0 + 4132352 (4132352) = #4132352/918:18.2
    relocatable, disc pos for caching/writing not required/ required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 4132352 blocks [LITE-ON DVDRW SOHW-1673S]
    --------------------------------------------------------------

    18:02:05 #11 Text 0 File ThreadedTransferInterface.cpp, Line 1047
    Prepare recorder [LITE-ON DVDRW SOHW-1673S] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 8463056896, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
    0 | lead-in | 0 | 0x00 | 0x41
    0 | 1 | 0 | 0x00 | 0x41
    0 | 1 | 1 | 0x00 | 0x41
    4132352 | lead-out | 1 | 0x00 | 0x41

    18:02:05 #12 Phase 24 File dlgbrnst.cpp, Line 1853
    Caching of files started

    18:02:05 #13 Text 0 File Burncd.cpp, Line 4003
    Cache writing successful.

    18:02:05 #14 Phase 25 File dlgbrnst.cpp, Line 1853
    Caching of files completed

    18:02:05 #15 Phase 36 File dlgbrnst.cpp, Line 1853
    Burn process started at 2,4x (3.324 KB/s)

    18:02:05 #16 Text 0 File ThreadedTransferInterface.cpp, Line 2497
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

    18:02:05 #17 Text 0 File DVDPlusDualLayer.cpp, Line 397
    Disc finalized, LBA total Image size: 4132352 (8071MB), Last LBA L0: 2066191 (4035MB)

    18:02:46 #18 Text 0 File DVDPlusDualLayer.cpp, Line 481
    L0 Data Zone Capacity set to 2066192 (1F8710h, 4035MB) -> OK, confirmed setting

    18:02:46 #19 CDR -1205 File DVDPlusDualLayer.cpp, Line 506
    Burning Layer 1

    18:02:46 #20 Text 0 File DVDPlusDualLayer.cpp, Line 514
    Start writing layer 1 at address 0 (0h)

    18:02:46 #21 Text 0 File Cdrdrv.cpp, Line 8281
    ---- DVD Structure: Physical Format Information (00h) ----
    Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD+R DL (14), Part Version: 1
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 2, Track Path: Opposite Track Path (OTP), Layer Type: recordable
    Linear Density: 0,293 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: FCFFFF h
    End Sector Number in Layer 0: 22870F h
    Data in Burst Cutting Area (BCA) does not exist
    Disc Application Code: 0 / 0 h
    Extended Information indicators: 0 h
    Disc Manufacturer ID: RICOHJPN
    Media type ID: D00
    Product revision number: 1
    Number of Physical format information bytes in use in ADIP up to byte 63: 64
    Media Specific [16..63]:
    00 00 00 52 49 43 4F 48 - 4A 50 4E 44 30 30 01 40 ...RICOHJPND00.@
    25 25 37 11 00 34 64 00 - 34 64 20 21 0C 0D 12 12 %%7..4d.4d.!....
    02 01 01 10 00 20 21 0C - 0D 12 12 02 01 01 10 00 ......!.........

    18:02:46 #22 Text 0 File dlgbrnst.cpp, Line 1711
    Set remaining time: 42:16,966 (2536966ms) -> OK

    18:02:46 #23 Text 0 File DVDPlusRW.cpp, Line 632
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    18:02:57 #24 SCSI -1135 File Cdrdrv.cpp, Line 1432
    SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x032C0000
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x03 (KEY_MEDIUM_ERROR)
    Sense Code: 0x0C
    Sense Qual: 0x00
    CDB Data: 0x2A 0x00 0x00 0x00 0x0D 0xE0 0x00 0x00 0x20 0x00 0x00 0x00
    Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
    0x00 0x00 0x00 0x00 0x0C 0x00

    18:02:57 #25 CDR -1135 File Writer.cpp, Line 311
    Write error

    18:02:57 #26 Text 0 File ThreadedTransfer.cpp, Line 229
    all writers idle, stopping conversion

    18:02:57 #27 Text 0 File ThreadedTransfer.cpp, Line 223
    conversion idle, stopping reader

    18:02:57 #28 Phase 127 File dlgbrnst.cpp, Line 1853
    Generating DVD high compatibility borders

    18:02:57 #29 Text 0 File dlgbrnst.cpp, Line 1711
    Set remaining time: 0:00,000 (0ms) -> OK

    18:02:57 #30 Phase 129 File dlgbrnst.cpp, Line 1853
    Generating DVD borders completed successfully

    18:02:57 #31 Text 0 File dlgbrnst.cpp, Line 1711
    Set remaining time: 0:00,000 (0ms) -> OK

    18:02:57 #32 Phase 38 File dlgbrnst.cpp, Line 1853
    Burn process failed at 2,4x (3.324 KB/s)


    Existing drivers:
    File 'Drivers\PXHELP20.SYS': Ver=2.02.62a, size=20016 bytes, created 28.10.2003 12:02:00 (Prassi/Veritas driver for win 2K)
    File 'Drivers\nvatabus.sys': Ver=5.10.2600.0446 built by: WinDDK, size=79360 bytes, created 03.06.2004 10:40:46 (Adapter driver for rec)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)


    Kann mir jemand verraten, wo genau der Fehler liegt ?
    Danke schonmal im Voraus !

    Gruß

    Batman(U)
  • Das ist noch ein Problem mit den Double Layer DVDs.Ich hab auch letztens zwei DVD DL verbrannt.Die DVDs sind von Ricoh DVD+R DL.In meinem Plextor gehen die gar nicht er erkennt die nichmal und im NEC kommt so ne schlechte quallität raus,kannste gleich in die Tonne kloppen.
    Mit Verbatim DL hab ich kein Problem.Brennt einwandfrei beide Brenner.

    Achja ich benutze Nero 7.2.0.3 neuste Version.
    [COLOR="Blue"][SIZE="3"]Das Problem ist nicht der Computer,das Problem sitzt davor.[/SIZE][/color]