viell. könnt Ihr mir helfen - ich komme nicht ganz weiter mit der Installation von Tom Tom 6 Navigator auf meinem Treo 650 mit PalmOS.
Dies habe ich geleecht (und stelle es bei Bedarf gerne auch hier zur Verfügung):
TomTom.Navigator.v6.0.Europe.Maps.Only.Multilanguage.Retail-rGPDA
Quellcode
- \\rg.nfo.txt
- \\Guam\cline.dat
- \\Guam\cname.dat
- \\Guam\cnode.dat
- \\Guam\faces.dat
- \\Guam\Guam.mid
- \\Guam\Guam.pna
- \\Guam\mapinfo.dat
- \\Guam\poi.dat
- \\Guam\tmccodes.dat
- \\Guam\traffic.dat
- \\TomTom Navigator 6\data.chk
- \\TomTom Navigator 6\data41.chk
- \\TomTom Navigator 6\data41.vif
- \\TomTom Navigator 6\TomTom Navigator.exe
- \\Western_and_Central_Europe\cline.dat
- \\Western_and_Central_Europe\cname.dat
- \\Western_and_Central_Europe\cnode.dat
- \\Western_and_Central_Europe\cphoneme.dat
- \\Western_and_Central_Europe\faces.dat
- \\Western_and_Central_Europe\mapinfo.dat
- \\Western_and_Central_Europe\MapSettings.cfg
- \\Western_and_Central_Europe\poi.dat
- \\Western_and_Central_Europe\tmccodes.dat
- \\Western_and_Central_Europe\traffic.dat
- \\Western_and_Central_Europe\Western_and_Central_Europe.mid
- \\Western_and_Central_Europe\Western_and_Central_Europe.mms
- \\Western_and_Central_Europe\Western_and_Central_Europe.pna
- \\Windows\BtCoreIf.dll
- \\Windows\BtSdkCE30.dll
- \\Windows\ttn6bt2003.dll
TomTom.Navigator.v6.0.Software.Only.PalmOS.incl.Keygen.Proper-iNDPDA
Quellcode
- \\file_id.diz
- \\indpda.nfo.txt
- \\keygen.zip
- \\Start.exe
- \\2577\AutoRun.exe
- \\2577\autorun.exe-install
- \\2577\autorun.exe-run
- \\2577\ttn.cab
- \\Guam\cline.dat
- \\Guam\cname.dat
- \\Guam\cnode.dat
- \\Guam\faces.dat
- \\Guam\Guam.mid
- \\Guam\Guam.pna
- \\Guam\mapinfo.dat
- \\Guam\poi.dat
- \\Guam\tmccodes.dat
- \\Guam\traffic.dat
- \\palm\start.prc
- \\palm\launcher\navstart.prc
- \\raster\usa_basic.ver
- \\raster\usx09_00000,00000.jpg
- \\raster\usx09_00000,00000.sat
- \\raster\usxe09_00000,08280.jpg
- \\raster\usxe09_00000,08280.sat
- \\raster\usxw09_12960,09120.jpg
- \\raster\usxw09_12960,09120.sat
- \\tomtom\data.chk
- \\tomtom\Munich.bin
- \\tomtom\palm.bif
- \\tomtom\ppc.bif
- \\voices\data00.chk
- \\voices\data00.vif
- \\voices\...
- \\voices\data39.chk
- \\voices\data39.vif
Kann mir mal bitte jmd verraten, was ich wohin kopieren muss?!?!? Ich bin ehrlich gesagt total planlos!
Die Software Only enthält folgende Info:
Quellcode
- 1] unzip the attached zip file and extract it to the directory that contains your map data.
- (This directory MUST have "map_name.mid" file, as in the map that you are going to register).
- 2] Open the windows command prompt and cd into the directory.
- 3] Execute the EXE file as shown below:TM6_kg_4_C4PDA.exe your_map.mid
- 4] It will ask you for your device ID, put that in and it will give you the unlock code
Die EuropMaps enthält folgende Info:
Irgendwie kann ich mit diesen Instructions so Recht nichts anfangen. Also - momentan hab ich nirgends irgendwas von TomTom installiert... Am schönsten wäre eine kleine Step-By-Step-Anleitung... ich bin nämlich total was diese Materie betrifft.
Vielen Dank schon mal im voraus!