Kann Autocad 2008 nicht brennen

Diese Seite verwendet Cookies. Durch die Nutzung unserer Seite erklären Sie sich damit einverstanden, dass wir Cookies setzen. Weitere Informationen

  • Kann Autocad 2008 nicht brennen

    Will Autocad 2008 brennen und schaff das einfach nicht.

    Einmal kam die MEldung PMA-Update fehlgeschlagen.

    Beim 2. mal kam eine andere MEldung und diese Logdatei:

    1C82-0000-19E5-MAAX-4000-7324-****

    Windows XP 5.1
    IA32
    WinAspi: -
    ahead WinASPI: File 'C:\Programme\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 02.11.2004 12:54:32

    NT-SPTI used
    Nero Version: 7.5.9.0
    Internal Version: 7, 5, 9, 0

    Recorder: <HL-DT-ST DVDRAM GSA-4167B>Version: DL13 - HA 1 TA 0 - 7.5.9.0
    Adapter driver: <IDE> HA 1
    Drive buffer : 2048kB
    Bus Type : default (0) -> ATAPI, detected: ?
    CD-ROM: <HL-DT-ST DVDRAM GSA-4167B>Version: DL13 - HA 1 TA 0 - 7.5.9.0
    Adapter driver: <IDE> HA 1

    === Scsi-Device-Map ===
    DiskPeripheral : SAMSUNG SP1203N atapi Port 0 ID 0 DMA: On
    DiskPeripheral : SAMSUNG SP1203N atapi Port 0 ID 1 DMA: On
    CdRomPeripheral : HL-DT-ST DVDRAM GSA-4167B atapi Port 1 ID 0 DMA: On
    CdRomPeripheral : NERO IMAGEDRIVE2 2.26 imagedrv Port 2 ID 0 DMA: Off

    === CDRom-Device-Map ===
    HL-DT-ST DVDRAM GSA-4167B F: CDRom0
    NERO IMAGEDRIVE2 G: CDRom3
    =======================

    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 74448896 (0) Byte
    BUFE : 0
    Physical memory : 511MB (523760kB)
    Free physical memory: 168MB (172056kB)
    Memory in use : 67 %
    Uncached PFiles: 0x0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)

    9.6.2007
    DVD-Image brennen
    16:53:20 #1 Text 0 File SCSIPTICommands.cpp, Line 411
    LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

    16:53:20 #2 Text 0 File Burncd.cpp, Line 3451
    Turn on Disc-At-Once, using DVD media

    16:53:20 #3 Text 0 File DlgWaitCD.cpp, Line 306
    Last possible write address on media: 2295103 (510:01.28, 4482MB)
    Last address to be written: 1889083 (419:47.58, 3689MB)

    16:53:20 #4 Text 0 File DlgWaitCD.cpp, Line 318
    Write in overburning mode: NO (enabled: CD)

    16:53:20 #5 Text 0 File DlgWaitCD.cpp, Line 2903
    Recorder: HL-DT-ST DVDRAM GSA-4167B, Media type: DVD+R
    Disc Manufacturer ID: CMC MAG, Media Type ID: M01, Product revision number: 0
    Disc Application Code: 0, Extended Information Indicators: 7

    16:53:20 #6 Text 0 File DlgWaitCD.cpp, Line 490
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================

    16:53:20 #7 Text 0 File ThreadedTransferInterface.cpp, Line 821
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 (2 - CD-ROM Modus 1, Joliet)
    2 indices, index0 (150) not provided
    original disc pos #0 + 1889084 (1889084) = #1889084/419:47.59
    not relocatable, disc pos for caching/writing not required/not required
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1888934 blocks [F: HL-DT-ST DVDRAM GSA-4167B]
    --------------------------------------------------------------

    16:53:21 #8 Text 0 File ThreadedTransferInterface.cpp, Line 1024
    Prepare [F: HL-DT-ST DVDRAM GSA-4167B] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1: Idx 0 Idx 1 Next Trk
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3868844032, ISRC ""
    DAO layout:
    ===========
    ___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
    0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
    0 | 1 | 0 | 0x41 | 1889084 | 1888934 | 0x00
    0 | 1 | 1 | 0x41 | 1889084 | 1888934 | 0x00
    1889084 | lead-out | 1 | 0x41 | 0 | 0 | 0x00

    16:53:21 #9 Text 0 File SCSIPTICommands.cpp, Line 209
    SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

    16:53:21 #10 Phase 36 File dlgbrnst.cpp, Line 1746
    Burn process started at 4x (5.540 KB/s)

    16:53:21 #11 Text 0 File ThreadedTransferInterface.cpp, Line 2743
    Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

    16:53:21 #12 Text 0 File Cdrdrv.cpp, Line 9234
    ---- DVD Structure: Physical Format Information (00h) ----
    Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD+R (10), Part Version: 1.0x (1)
    Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
    End Physical Sector Number of Data Area: 26053F h
    End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
    Data in Burst Cutting Area (BCA) does not exist
    Disc Application Code: 0 / 0 h
    Extended Information indicators: 7 h
    Disc Manufacturer ID: CMC.MAG.
    Media type ID: M01
    Product revision number: 0
    Number of Physical format information bytes in use in ADIP up to byte 63: 56
    Media Specific [16..63]:
    00 00 07 43 4D 43 20 4D - 41 47 00 4D 30 31 00 38 ...CMC.MAG.M01.8
    23 54 37 18 00 3E 6E 00 - 70 62 15 15 0B 0B 08 08 #T7..>n.pb......
    01 19 1B 0B 0B 0E 0F 01 - 00 00 00 00 00 00 00 00 ................

    16:53:21 #13 Text 0 File DVDR.cpp, Line 6251
    Drive: HL-DT-ST DVDRAM GSA-4167B
    Book Type request [LG]: DVD-ROM
    Changing the Book Type was finished successfully, return code 0

    16:53:21 #14 CDR -1207 File DVDR.cpp, Line 6174
    Book Type automatically set to: DVD-ROM

    16:53:21 #15 Text 0 File DVDPlusRW.cpp, Line 674
    Start write address at LBA 0
    DVD high compatibility mode: Yes

    17:01:11 #16 SPTI -1061 File SCSIPassThrough.cpp, Line 179
    CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1061)
    Sense Key: 0x04 (KEY_HARDWARE_ERROR)
    Sense Code: 0x44
    Sense Qual: 0x86
    CDB Data: 0x2A 00 00 12 C1 A0 00 00 20 00 00 00
    Sense Area: 0x70 00 04 00 00 00 00 10 35 00 04 0E 44 86
    Buffer x0b46f800: Len x10000
    0x53 69 74 65 40 40 00 00 30 1C 2E 78 00 00 00 00
    0x2E 3F 41 56 58 42 6F 75 6E 64 4F 62 6A 65 63 74
    0x53 69 74 65 40 43 4F 6C 65 43 6F 6E 74 72 6F 6C

    17:01:11 #17 CDR -1061 File Writer.cpp, Line 299
    Internal target failure
    F: HL-DT-ST DVDRAM GSA-4167B

    17:01:13 #18 SPTI -1061 File SCSIPassThrough.cpp, Line 179
    CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1061)
    Sense Key: 0x04 (KEY_HARDWARE_ERROR)
    Sense Code: 0x44
    Sense Qual: 0x86
    CDB Data: 0x35 02 00 00 00 00 00 00 00 00 00 00
    Sense Area: 0x71 00 04 00 00 00 00 10 35 00 04 0E 44 86

    17:01:18 #19 CDR -1061 File WriterStatus.cpp, Line 162
    Internal target failure
    F: HL-DT-ST DVDRAM GSA-4167B

    17:01:18 #20 TRANSFER -24 File WriterStatus.cpp, Line 162
    Could not perform end of Disc-at-once

    17:01:21 #21 Phase 38 File dlgbrnst.cpp, Line 1746
    Burn process failed at 4x (5.540 KB/s)

    17:01:23 #22 Text 0 File SCSIPTICommands.cpp, Line 254
    SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

    17:01:30 #23 Text 0 File Cdrdrv.cpp, Line 10467
    DriveLocker: UnLockVolume completed

    17:01:30 #24 Text 0 File SCSIPTICommands.cpp, Line 411
    UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL


    Existing drivers:
    File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created 25.08.2006 05:47:00
    File 'Drivers\PXHELP20.SYS': Ver=3.00.33a, size=36528 bytes, created 25.08.2006 05:47:00 (Prassi/Veritas driver for win 2K)

    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)



    Weiß jemand weiter?

    Gruß, sandwich01