Einmal kam die MEldung PMA-Update fehlgeschlagen.
Beim 2. mal kam eine andere MEldung und diese Logdatei:
1C82-0000-19E5-MAAX-4000-7324-****
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Programme\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 02.11.2004 12:54:32
NT-SPTI used
Nero Version: 7.5.9.0
Internal Version: 7, 5, 9, 0
Recorder: <HL-DT-ST DVDRAM GSA-4167B>Version: DL13 - HA 1 TA 0 - 7.5.9.0
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <HL-DT-ST DVDRAM GSA-4167B>Version: DL13 - HA 1 TA 0 - 7.5.9.0
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : SAMSUNG SP1203N atapi Port 0 ID 0 DMA: On
DiskPeripheral : SAMSUNG SP1203N atapi Port 0 ID 1 DMA: On
CdRomPeripheral : HL-DT-ST DVDRAM GSA-4167B atapi Port 1 ID 0 DMA: On
CdRomPeripheral : NERO IMAGEDRIVE2 2.26 imagedrv Port 2 ID 0 DMA: Off
=== CDRom-Device-Map ===
HL-DT-ST DVDRAM GSA-4167B F: CDRom0
NERO IMAGEDRIVE2 G: CDRom3
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
BUFE : 0
Physical memory : 511MB (523760kB)
Free physical memory: 168MB (172056kB)
Memory in use : 67 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
9.6.2007
DVD-Image brennen
16:53:20 #1 Text 0 File SCSIPTICommands.cpp, Line 411
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
16:53:20 #2 Text 0 File Burncd.cpp, Line 3451
Turn on Disc-At-Once, using DVD media
16:53:20 #3 Text 0 File DlgWaitCD.cpp, Line 306
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 1889083 (419:47.58, 3689MB)
16:53:20 #4 Text 0 File DlgWaitCD.cpp, Line 318
Write in overburning mode: NO (enabled: CD)
16:53:20 #5 Text 0 File DlgWaitCD.cpp, Line 2903
Recorder: HL-DT-ST DVDRAM GSA-4167B, Media type: DVD+R
Disc Manufacturer ID: CMC MAG, Media Type ID: M01, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 7
16:53:20 #6 Text 0 File DlgWaitCD.cpp, Line 490
>>> Protocol of DlgWaitCD activities: <<<
=========================================
16:53:20 #7 Text 0 File ThreadedTransferInterface.cpp, Line 821
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - CD-ROM Modus 1, Joliet)
2 indices, index0 (150) not provided
original disc pos #0 + 1889084 (1889084) = #1889084/419:47.59
not relocatable, disc pos for caching/writing not required/not required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1888934 blocks [F: HL-DT-ST DVDRAM GSA-4167B]
--------------------------------------------------------------
16:53:21 #8 Text 0 File ThreadedTransferInterface.cpp, Line 1024
Prepare [F: HL-DT-ST DVDRAM GSA-4167B] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3868844032, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 1889084 | 1888934 | 0x00
0 | 1 | 1 | 0x41 | 1889084 | 1888934 | 0x00
1889084 | lead-out | 1 | 0x41 | 0 | 0 | 0x00
16:53:21 #9 Text 0 File SCSIPTICommands.cpp, Line 209
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
16:53:21 #10 Phase 36 File dlgbrnst.cpp, Line 1746
Burn process started at 4x (5.540 KB/s)
16:53:21 #11 Text 0 File ThreadedTransferInterface.cpp, Line 2743
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
16:53:21 #12 Text 0 File Cdrdrv.cpp, Line 9234
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 7 h
Disc Manufacturer ID: CMC.MAG.
Media type ID: M01
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 07 43 4D 43 20 4D - 41 47 00 4D 30 31 00 38 ...CMC.MAG.M01.8
23 54 37 18 00 3E 6E 00 - 70 62 15 15 0B 0B 08 08 #T7..>n.pb......
01 19 1B 0B 0B 0E 0F 01 - 00 00 00 00 00 00 00 00 ................
16:53:21 #13 Text 0 File DVDR.cpp, Line 6251
Drive: HL-DT-ST DVDRAM GSA-4167B
Book Type request [LG]: DVD-ROM
Changing the Book Type was finished successfully, return code 0
16:53:21 #14 CDR -1207 File DVDR.cpp, Line 6174
Book Type automatically set to: DVD-ROM
16:53:21 #15 Text 0 File DVDPlusRW.cpp, Line 674
Start write address at LBA 0
DVD high compatibility mode: Yes
17:01:11 #16 SPTI -1061 File SCSIPassThrough.cpp, Line 179
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1061)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x44
Sense Qual: 0x86
CDB Data: 0x2A 00 00 12 C1 A0 00 00 20 00 00 00
Sense Area: 0x70 00 04 00 00 00 00 10 35 00 04 0E 44 86
Buffer x0b46f800: Len x10000
0x53 69 74 65 40 40 00 00 30 1C 2E 78 00 00 00 00
0x2E 3F 41 56 58 42 6F 75 6E 64 4F 62 6A 65 63 74
0x53 69 74 65 40 43 4F 6C 65 43 6F 6E 74 72 6F 6C
17:01:11 #17 CDR -1061 File Writer.cpp, Line 299
Internal target failure
F: HL-DT-ST DVDRAM GSA-4167B
17:01:13 #18 SPTI -1061 File SCSIPassThrough.cpp, Line 179
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1061)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x44
Sense Qual: 0x86
CDB Data: 0x35 02 00 00 00 00 00 00 00 00 00 00
Sense Area: 0x71 00 04 00 00 00 00 10 35 00 04 0E 44 86
17:01:18 #19 CDR -1061 File WriterStatus.cpp, Line 162
Internal target failure
F: HL-DT-ST DVDRAM GSA-4167B
17:01:18 #20 TRANSFER -24 File WriterStatus.cpp, Line 162
Could not perform end of Disc-at-once
17:01:21 #21 Phase 38 File dlgbrnst.cpp, Line 1746
Burn process failed at 4x (5.540 KB/s)
17:01:23 #22 Text 0 File SCSIPTICommands.cpp, Line 254
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
17:01:30 #23 Text 0 File Cdrdrv.cpp, Line 10467
DriveLocker: UnLockVolume completed
17:01:30 #24 Text 0 File SCSIPTICommands.cpp, Line 411
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
Existing drivers:
File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created 25.08.2006 05:47:00
File 'Drivers\PXHELP20.SYS': Ver=3.00.33a, size=36528 bytes, created 25.08.2006 05:47:00 (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Weiß jemand weiter?
Gruß, sandwich01