Es geht darum: Ich hab eine recht neue Festplatte (Samsung hd501lj 500 Gb) und diese in ein externes Gehäuse eingebaut. Wenn ich diese nun an meinen Laptop anschließe (läuft unter Vista), wird sie nur in ca. 50% der Fällen erkannt. Entweder kommt das Fenster AutoPlay und ich kann auf die Festplatte zugreifen, allerdings schließen sich nach ein paar Sekunden alle Fenster der Festplatte und die Kontrollleuchte, die zeigt, dass die Platte läuft, geht auch aus. Dabei hört man, wie sich noch "im Ruhezustand" läuft, kann allerdings nicht mehr drauf zugreifen o.ä. In den anderen Fällen passiert einfach gar nichts bzw. es kommt ein Fenster, dass ein Gerät vom USB Anschluss nicht erkannt und verwendet werden kann.
Woran kann das liegen? Liegt das Problem an Vista (ich meine, dass es bei einem bekanntan unter XP ohne Probleme lief)?
Gruß Sn4tch
[SIZE=1]
IP-Verteilungen: IP 1;IP 2;IP 3;IP 4;IP 5;IP 6;IP 7;IP 8;IP 9;IP 10;IP 11;IP 12;IP 13;IP 14;IP 15;IP 16;IP 17;IP 18;IP 19;IP 20
Uploads: [COLOR="Lime"]UP 1[/color];[COLOR="Lime"]UP 2[/color];[COLOR="LIme"]UP 3[/color];[COLOR="Lime"]UP 4[/color];[COLOR="Lime"]UP 5[/color];[COLOR="Lime"]UP 6[/color];[COLOR="Lime"]UP 7[/color];[COLOR="Lime"]UP 8[/color];[COLOR="Lime"]UP 9[/color];[COLOR="Lime"]UP 10[/color];[COLOR="Lime"]UP 11[/color];[COLOR="Lime"]UP 12[/color];[COLOR="Lime"]UP 13[/color];[COLOR="Lime"]UP 14[/color]
Gesamtupload: [COLOR="Blue"]4,87 Gb[/color]
[COLOR="Black"]Blackliste[/color]
[/SIZE]Uploads: [COLOR="Lime"]UP 1[/color];[COLOR="Lime"]UP 2[/color];[COLOR="LIme"]UP 3[/color];[COLOR="Lime"]UP 4[/color];[COLOR="Lime"]UP 5[/color];[COLOR="Lime"]UP 6[/color];[COLOR="Lime"]UP 7[/color];[COLOR="Lime"]UP 8[/color];[COLOR="Lime"]UP 9[/color];[COLOR="Lime"]UP 10[/color];[COLOR="Lime"]UP 11[/color];[COLOR="Lime"]UP 12[/color];[COLOR="Lime"]UP 13[/color];[COLOR="Lime"]UP 14[/color]
Gesamtupload: [COLOR="Blue"]4,87 Gb[/color]
[COLOR="Black"]Blackliste[/color]