Scaleo 600 Arbeitsspeicher aufrüsten

  • geschlossen
  • Problem

Diese Seite verwendet Cookies. Durch die Nutzung unserer Seite erklären Sie sich damit einverstanden, dass wir Cookies setzen. Weitere Informationen

  • Scaleo 600 Arbeitsspeicher aufrüsten

    Liebe freesoft Gemeinde,

    Mein PC:

    ***** Start of Report *****
    --------------------------------------------------------------------------------

    <<< Mainboard >>>
    --------------------------------------------------------------------------------

    < System >
    Manufacturer: FUJITSU SIEMENS
    Model: GA-8SGXP
    ID: 00000000-00000000-0D000000-F906CC61

    < Mainboard >
    Manufacturer: Gigabyte Technology Co., Ltd.
    Multi-Processor (MP) Support: No
    MPS Version: 1.40
    Model: GA-8SGXP
    System BIOS: 01/03/2005-SiS-648-6A7I0G0LC-00
    Chipset: SiS 648/655

    < System Memory Controller >
    Location: Mainboard
    Error Correction Capability: None
    Number of Memory Slots: 3
    Maximum Installable Memory: 3GB
    Bank0/1 - A0: DIMM 512MB/64 @ 333MHz
    Bank2/3 - A1: DIMM 512MB/64 @ 333MHz
    Bank4/5 - A2: Empty

    < Chipset >
    Model: SiS SiS648 CPU to PCI Bridge
    Revision: F2
    Bus: Intel AGTL+
    Front Side Bus Speed: 4x 201MHz (804MHz)
    Maximum FSB Speed: 4x 200MHz (800MHz)
    Width: 64-bit
    HTT - Hyper-Threading Technolo:Yes
    I/O Queue Depth: 12 request(s)
    Priority Master Queue Depth: 7 request(s)
    Maximum Bus Bandwidth: 6.28GB/s

    < Chipset 1 Hub Interface >
    Type: MUTOL
    Width: 16-bit
    Full Duplex: No
    Multiplier: 2/1x

    < Logical/Chipset Memory Banks >
    Bank 0: 512MB DDR 2.5-3-3-7 2T
    Bank 1: 512MB DDR 2.5-3-3-7 2T
    Supported Memory Types: SDRAM DDR Registered
    Channels: 1
    Memory Bus Speed: 2x 168MHz (336MHz)
    Maximum Memory Speed: 2x 200MHz (400MHz)
    Multiplier: 5/6x
    Width: 64-bit
    Memory Controller in Processor:No
    Refresh Rate: 7.80µs
    Power Save Mode: No
    Fixed Hole Present: No
    Maximum Memory Bus Bandwidth: 2.63GB/s

    < APIC 1 >
    Version: 1.04
    Multiplier: 1/2x
    Maximum Interrupts: 24
    IRQ Handler Engaged: Yes
    Enhanced Support: Yes

    < Memory Module >
    Manufacturer: Micron
    Model: 8VDDT6464AG-335DB
    Serial Number: C00C2B25
    Type: 512MB DDR
    Technology: 8x(64Mx8)
    Speed: PC2700U DDR-166
    Standard Timings: 2.5-3-3-7 2-10-0-0
    Version: 1.00
    Date of Manufacture: Donnerstag, 26. Februar 2004
    Memory DC Line: 2.50V
    Set Timing @ 167MHz: 2.5-3-3-7 2-10-0-0
    Set Timing @ 133MHz: 2.0-2-2-6 2-8-0-0

    < Memory Module >
    Manufacturer: Micron
    Model: 8VDDT6464AG-335DB
    Serial Number: C00C2B2C
    Type: 512MB DDR
    Technology: 8x(64Mx8)
    Speed: PC2700U DDR-166
    Standard Timings: 2.5-3-3-7 2-10-0-0
    Version: 1.00
    Date of Manufacture: Donnerstag, 26. Februar 2004
    Memory DC Line: 2.50V
    Set Timing @ 167MHz: 2.5-3-3-7 2-10-0-0
    Set Timing @ 133MHz: 2.0-2-2-6 2-8-0-0

    < Environment Monitor 1 >
    Model: ITE IT8705F LPC
    Version: 3.00
    Mainboard Specific Support: No

    < Temperature Sensor(s) >
    Board Temperature: 43.00°C
    CPU Temperature: 50.00°C td
    Auxiliary Temperature: 27.00°C

    < Cooling Device(s) >
    Auto Fan Speed Control: No
    System Fan: 2446rpm

    < Voltage Sensor(s) >
    CPU DC Line: 1.58V
    Aux DC Line: 1.84V
    +3.3V DC Line: 3.28V
    +5V DC Line: 4.19V
    +12V DC Line: 11.42V
    -12V DC Line: -2.24V
    -5V DC Line: -3.95V
    Standby DC Line: 4.81V
    Battery DC Line: 3.25V

    < System Bus(es) on Hub 1 >
    Version: 2.10
    System Bus 0: PCI
    System Bus 1: AGP

    < LPC Hub Controller 1 >
    Model: SiS PCI to ISA Bridge
    Revision: D7
    ACPI Power Management Enabled: Yes

    < Disk Controller >
    Model: SiS SiS5513 EIDE Controller (A,B step)
    Interface: ATA
    Revision: A2
    Channels: 4

    < Disk Controller >
    Model: Giga-Byte SiS180 IDE UDMA Controller
    Interface: ATA
    Revision: A2
    Channels: 4

    < Audio Device >
    Model: Giga-Byte Onboard Sound Codec
    Revision: K1
    Type: AC '97
    Version: 2.01

    < Audio Codec >
    Model: Gammagraphx Inc 0000h
    Revision: A1
    Version: 2.01

    < Audio Codec >
    Model: Gammagraphx Inc 0000h
    Revision: A1
    Version: 2.01

    < USB Controller 1 >
    Model: SiS SiS5597/8 Universal Serial Bus Controller
    Revision: A16
    Version: 1.00
    Interface: OHCI
    Channels: 3
    Supported Speed(s): Low (1.5Mbps) Full (12Mbps)
    Legacy Emulation Enabled: No

    < USB Controller 2 >
    Model: SiS SiS5597/8 Universal Serial Bus Controller
    Revision: A16
    Version: 1.00
    Interface: OHCI
    Channels: 3
    Supported Speed(s): Low (1.5Mbps) Full (12Mbps)
    Legacy Emulation Enabled: No

    < USB Controller 3 >
    Model: SiS SiS5597/8 Universal Serial Bus Controller
    Revision: A16
    Version: 1.00
    Interface: OHCI
    Channels: 2
    Supported Speed(s): Low (1.5Mbps) Full (12Mbps)
    Legacy Emulation Enabled: No

    < USB Controller 4 >
    Model: Giga-Byte SiS7002 USB 2.0 Enhanced Controller
    Revision: A1
    Version: 2.00
    Specification: 1.00
    Interface: EHCI
    Channels: 8
    Companion Controllers: 3
    Supported Speed(s): Low (1.5Mbps) Full (12Mbps) High (480Mbps)
    Addressing Support: 32-bit
    Legacy Emulation Enabled: No

    < FireWire/1394 Controller 1 >
    Model: Giga-Byte GA-7VT600-1394 Motherboard
    Revision: I1
    Version: 1.00
    Interface: OHCI
    Enhanced Support: No
    Channels: 64
    Speed: 400MHz

    < System SMBus Controller 1 >
    Model: SiS 964 Int SMBus
    Specification: 1.00
    Advanced TCO Mode Enabled: No
    Slave Device Enabled: No
    PEC Support: Yes
    Speed: 55kHz

    < Expansion Slot(s) >
    PCI (9h): PCI 32-bit +5V +3.3V PME Full-Length
    Available
    PCI (Ah): PCI 32-bit +5V +3.3V PME Full-Length
    Available
    PCI (Bh): PCI 32-bit +5V +3.3V PME Full-Length Used
    PCI (Ch): PCI 32-bit +5V +3.3V PME Full-Length Used
    PCI (Dh): PCI 32-bit +5V +3.3V PME Full-Length Used
    AGP (8h): AGP 32-bit +5V Full-Length Used

    < Port Connector(s) >
    PRIMARY IDE: ATA
    SECONDARY IDE: ATA
    FDD: 8251 FIFO / Floppy Disk
    COM1: Serial Port 16450 / 9 Pin Dual Inline / DB-9
    pin male
    COM2: Serial Port 16450 / 9 Pin Dual Inline / DB-9
    pin male
    LPT1: Parallel Port ECP/EPP / DB-25 pin female / DB-
    25 pin female
    Keyboard: Keyboard / PS/2
    PS/2 Mouse - No Detected: Mouse / PS/2 / PS/2
    USB: USB / USB

    < Performance Tips >
    Tip 2532: Consider adding more CPUs for better
    utilisation.
    Notice 224: SMBIOS/DMI information may be inaccurate.
    Tip 2511: Some memory slots are free so the memory can
    be easily upgraded.
    Warning 100: Large memory sizes should be made of
    Registered/Buffered memory.
    Tip 2: Double-click tip or press Enter while a tip
    is selected for more information about the
    tip.

    <<< Mainboard Configuration >>>
    --------------------------------------------------------------------------------

    << System BIOS >>
    < General Information >
    Manufacturer: Award Software International, Inc.
    Version: F10
    Date of Manufacture: Montag, 3. Januar 2005
    Plug & Play Version: 1.00
    SMBIOS/DMI Version: 2.30
    (EE)PROM Size: 256kB

    < General Capabilities >
    Can be Updated/Flashed: Yes
    Can be Shadowed: Yes
    Is Socketed: Yes
    Supports Plug & Play: Yes
    Supports ESCD: No
    Supports Enhanced Disk Drive: Yes
    NEC PC-98 Spec Compatible: No

    < Power Management Features >
    Supports APM: Yes
    Supports ACPI: Yes
    Supports Smart Battery: No

    < Boot Features >
    Supports Selective Booting: Yes
    Supports CD/DVD Boot: Yes
    Supports PCMCIA/CardBus Boot: No
    Supports LS-120 Boot: Yes
    Supports ZIP Boot: Yes
    Supports i2o Boot: No
    Supports FireWire/1394 Boot: No
    Supports BIOS Boot Block: Yes
    Supports Interactive Network B:Yes

    < Performance Tips >
    Tip 201: System BIOS is old. Check for an update.
    Notice 224: SMBIOS/DMI information may be inaccurate.
    Tip 212: BIOS can be shadowed so check whether it is.
    Tip 211: BIOS is flash-able and socketed so it can be
    upgraded when needed.
    Tip 2: Double-click tip or press Enter while a tip
    is selected for more information about the
    tip.

    << CMOS >>
    < Date & Time >
    Date: Samstag, 4. Oktober 2008
    Hour Format: 24h
    Daylight Saving: No
    Time: 17:57:07
    Alarm Time: 00:00:00

    < System Status >
    CMOS Battery Power OK: Yes
    RTC Continuous Power: Yes
    RTC Time Valid: Yes
    CMOS Checksum OK: Yes
    Configuration Valid: Yes
    Disk Controller OK: Yes
    Memory Size OK: Yes
    Installed Adapter(s) OK: Yes

    < On-board Devices >
    Video Adapter: No
    Keyboard: No
    Floppy Disk: Yes
    Co-Processor (FPU): Yes

    < Installed Drives >
    Hard Disk 1 Type: T47
    Hard Disk 2 Type: T47

    < Hard Disk 1 >
    Cylinders: 65535
    Heads: 16
    Sectors per Track: 255
    Landing Zone: 65534

    < Hard Disk 2 >
    Cylinders: 65535
    Heads: 16
    Sectors per Track: 255
    Landing Zone: 65534

    <<< Processors >>>
    --------------------------------------------------------------------------------

    << CPU 1 [Processor 0, Core 0, Thread 0] >>
    < Processor >
    Model: Intel(R) Pentium(R) 4 CPU 3.20GHz
    Speed: 3.21GHz
    Cores per Processor: 1 Unit(s)
    Threads per Core: 2 Unit(s)
    Bus: Intel AGTL+
    Package: FC µPGA478
    Rated Speed/FSB: 3.20GHz / 4x 200MHz
    Multiplier: 16/1x
    Minimum/Maximum Multiplier: 0/1x - 16/1x
    Generation: G8
    Name: P4N (Northwood) Pentium 4C 130nm 1.6-3.4GHz
    1.475-1.575V
    Revision/Stepping: 2 / 9 (9)
    Stepping Mask: D1
    Microcode: MU0F02092E
    Core Voltage Rating: 1.550V
    Maximum Physical / Virtual Add:36-bit / 32-bit
    Native Page Size: 4kB

    < Co-Processor (FPU) >
    Speed: 3.21GHz
    Type: Built-in
    Revision/Stepping: 2 / 9 (9)

    < Cache Information >
    Internal Data Cache: 8kB, Synchronous, Write-Thru, 4-way, 64 byte
    line size, 2 lines per sector
    Internal Trace Cache: 12kB, Synchronous, Write-Thru, 8-way, 64 byte
    line size
    L2 On-board Cache: 512kB, ECC, Synchronous, ATC, 8-way, 64 byte
    line size, 2 lines per sector
    L2 Cache Multiplier: 1/1x

    < Upgradeability >
    Socket/Slot: Socket 478
    Upgrade Interface: ZIF Socket
    Supported Speed(s): 4GHz

    < Environment Monitor 1 >
    Model: ITE IT8705F LPC
    Version: 3.00
    Mainboard Specific Support: No

    < Power Rating(s) >
    CPU Core Power: 88.00W
    CPU Cooling System Thermal Res:0.09°C/W

    < Sensors >
    CPU Temperature: 51.00°C td
    CPU DC Line: 1.55V

    < Features >
    FPU - Co-Processor Built-in: Yes
    VME - Virtual Mode Extensions: Yes
    DE - Debugging Extension: Yes
    PSE - Page Size Extension: Yes
    TSC - Time Stamp Counter: Yes
    MSR - Model Specific Registers:Yes
    PAE - Physical Address Extensi:Yes
    MCE - Machine Check Exception: Yes
    CX8 - Compare & Exchange 8-byt:Yes
    APIC - Local APIC Built-in: Yes
    SEP - Fast System Call: Yes
    MTRR - Memory Type Range Regis:Yes
    PGE - Page Global Enable: Yes
    MCA - Machine Check Architectu:Yes
    PAT - Page Attribute Table: Yes
    PSE36 - 36-bit Page Size Exten:Yes
    PSN - Unique Serial Number: No
    CLF - Cache Line Flush Support:Yes
    DS - Debug Trace & EMON Store: Yes
    ACPI - Software Clock Control: Yes
    (W)MMX Technology: Yes
    FXSR - Fast Float Save & Resto:Yes
    SSE Technology: Yes
    SSE2 Technology: Yes
    SS - Self Snoop: Yes
    HTT - Hyper-Threading Technolo:Yes
    TM - Thermal Monitor: Yes
    PBE - Pending Break Enable: Yes
    IA64 Technology: No
    SSE3 Technology: No
    PCLMULQDQ - Carryless Multipli:No
    MON - Monitor/MWait: No
    DSCPL - CPL qualified Debug St:No
    VMX - Virtual Machine eXtensio:No
    TXT - Trust Execution Technolo:No
    EIST - Enhanced SpeedStep Tech:No
    TM2 - Thermal Monitor 2: No
    Supplemental SSE3 Technology: No
    CID - Context ID: Yes
    FMA - Fused Multiply Add eXten:No
    CX16 - Compare & Exchange 16-b:No
    xTPR - Send Task Priority Mess:Yes
    PDCM - PerfMon and Debug: No
    DCA - Direct Cache Access: No
    SSE4.1 Technology: No
    SSE4.2 Technology: No
    x2APIC - v2 APIC Mode: No
    POPCNT - Pop Count: No
    AES - Cryptography Support: No
    XSAVE - eXtended State Managem:No
    OSXSAVE - OS Enabled eXtended :No
    AVX - Advanced Vector eXtensio:No
    DAZ - Denormals Are Zero: Yes

    < Advanced Settings >
    Data Error Checking: No
    Fast Strings: Yes
    x86 FPU Compatibility Mode: No
    Prefetch Queue: Yes
    Branch Trace Storage: Yes
    Data Cache Active Mode: Yes
    I/O Queue Depth: 12 request(s)
    TM - Thermal Monitor: Yes

    < Symmetric Multiprocessing (SMP) Settings >
    Maximum Supported Configuratio:2-way
    Bootstrap CPU: Yes
    Global APIC Engaged: Yes
    APIC ID: 0
    APIC Cluster ID: 0
    Arbitration ID: 0

    < Machine Check Architecture Settings >
    Number of Reporting Banks: 4
    Extended Machine Check Support:Yes
    Number of Extended Reporting B:12

    < Variable Range MTRR Settings >
    MTRR 0: 00000000-3FFFFFFF WB

    < Fixed Range MTRR Settings >
    MTRR 0 Range 0: 00000000-0000FFFF WB
    MTRR 0 Range 1: 00010000-0001FFFF WB
    MTRR 0 Range 2: 00020000-0002FFFF WB
    MTRR 0 Range 3: 00030000-0003FFFF WB
    MTRR 0 Range 4: 00040000-0004FFFF WB
    MTRR 0 Range 5: 00050000-0005FFFF WB
    MTRR 0 Range 6: 00060000-0006FFFF WB
    MTRR 0 Range 7: 00070000-0007FFFF WB
    MTRR 1 Range 0: 00080000-00083FFF WB
    MTRR 1 Range 1: 00084000-00087FFF WB
    MTRR 1 Range 2: 00088000-0008BFFF WB
    MTRR 1 Range 3: 0008C000-0008FFFF WB
    MTRR 1 Range 4: 00090000-00093FFF WB
    MTRR 1 Range 5: 00094000-00097FFF WB
    MTRR 1 Range 6: 00098000-0009BFFF WB
    MTRR 1 Range 7: 0009C000-0009FFFF WB
    MTRR 2 Range 0: 000A0000-000A3FFF UC
    MTRR 2 Range 1: 000A4000-000A7FFF UC
    MTRR 2 Range 2: 000A8000-000ABFFF UC
    MTRR 2 Range 3: 000AC000-000AFFFF UC
    MTRR 2 Range 4: 000B0000-000B3FFF UC
    MTRR 2 Range 5: 000B4000-000B7FFF UC
    MTRR 2 Range 6: 000B8000-000BBFFF UC
    MTRR 2 Range 7: 000BC000-000BFFFF UC
    MTRR 3 Range 0: 000C0000-000C0FFF WP
    MTRR 3 Range 1: 000C1000-000C1FFF WP
    MTRR 3 Range 2: 000C2000-000C2FFF WP
    MTRR 3 Range 3: 000C3000-000C3FFF WP
    MTRR 3 Range 4: 000C4000-000C4FFF WP
    MTRR 3 Range 5: 000C5000-000C5FFF WP
    MTRR 3 Range 6: 000C6000-000C6FFF WP
    MTRR 3 Range 7: 000C7000-000C7FFF WP
    MTRR 4 Range 0: 000C8000-000C8FFF WP
    MTRR 4 Range 1: 000C9000-000C9FFF WP
    MTRR 4 Range 2: 000CA000-000CAFFF WP
    MTRR 4 Range 3: 000CB000-000CBFFF WP
    MTRR 4 Range 4: 000CC000-000CCFFF WP
    MTRR 4 Range 5: 000CD000-000CDFFF WP
    MTRR 4 Range 6: 000CE000-000CEFFF WP
    MTRR 4 Range 7: 000CF000-000CFFFF UC
    MTRR 5 Range 0: 000D0000-000D0FFF UC
    MTRR 5 Range 1: 000D1000-000D1FFF UC
    MTRR 5 Range 2: 000D2000-000D2FFF UC
    MTRR 5 Range 3: 000D3000-000D3FFF UC
    MTRR 5 Range 4: 000D4000-000D4FFF UC
    MTRR 5 Range 5: 000D5000-000D5FFF UC
    MTRR 5 Range 6: 000D6000-000D6FFF UC
    MTRR 5 Range 7: 000D7000-000D7FFF UC
    MTRR 6 Range 0: 000D8000-000D8FFF UC
    MTRR 6 Range 1: 000D9000-000D9FFF UC
    MTRR 6 Range 2: 000DA000-000DAFFF UC
    MTRR 6 Range 3: 000DB000-000DBFFF UC
    MTRR 6 Range 4: 000DC000-000DCFFF UC
    MTRR 6 Range 5: 000DD000-000DDFFF UC
    MTRR 6 Range 6: 000DE000-000DEFFF UC
    MTRR 6 Range 7: 000DF000-000DFFFF UC
    MTRR 7 Range 0: 000E0000-000E0FFF UC
    MTRR 7 Range 1: 000E1000-000E1FFF UC
    MTRR 7 Range 2: 000E2000-000E2FFF UC
    MTRR 7 Range 3: 000E3000-000E3FFF UC
    MTRR 7 Range 4: 000E4000-000E4FFF UC
    MTRR 7 Range 5: 000E5000-000E5FFF UC
    MTRR 7 Range 6: 000E6000-000E6FFF UC
    MTRR 7 Range 7: 000E7000-000E7FFF UC
    MTRR 8 Range 0: 000E8000-000E8FFF UC
    MTRR 8 Range 1: 000E9000-000E9FFF UC
    MTRR 8 Range 2: 000EA000-000EAFFF UC
    MTRR 8 Range 3: 000EB000-000EBFFF UC
    MTRR 8 Range 4: 000EC000-000ECFFF UC
    MTRR 8 Range 5: 000ED000-000EDFFF UC
    MTRR 8 Range 6: 000EE000-000EEFFF UC
    MTRR 8 Range 7: 000EF000-000EFFFF UC
    MTRR 9 Range 0: 000F0000-000F0FFF WT
    MTRR 9 Range 1: 000F1000-000F1FFF WT
    MTRR 9 Range 2: 000F2000-000F2FFF WT
    MTRR 9 Range 3: 000F3000-000F3FFF WT
    MTRR 9 Range 4: 000F4000-000F4FFF WT
    MTRR 9 Range 5: 000F5000-000F5FFF WT
    MTRR 9 Range 6: 000F6000-000F6FFF WT
    MTRR 9 Range 7: 000F7000-000F7FFF WT
    MTRR 10 Range 0: 000F8000-000F8FFF WT
    MTRR 10 Range 1: 000F9000-000F9FFF WT
    MTRR 10 Range 2: 000FA000-000FAFFF WT
    MTRR 10 Range 3: 000FB000-000FBFFF WT
    MTRR 10 Range 4: 000FC000-000FCFFF WT
    MTRR 10 Range 5: 000FD000-000FDFFF WT
    MTRR 10 Range 6: 000FE000-000FEFFF WT
    MTRR 10 Range 7: 000FF000-000FFFFF WT

    < PAT Settings >
    PAT 0: WB
    PAT 1: WC
    PAT 2: UC-
    PAT 3: UC
    PAT 4: WB
    PAT 5: WC
    PAT 6: UC-
    PAT 7: UC

    < Performance Tips >
    Tip 210: Mainboard supports faster CPUs, so the CPU
    can be upgraded when needed.
    Notice 224: SMBIOS/DMI information may be inaccurate.
    Tip 2: Double-click tip or press Enter while a tip
    is selected for more information about the
    tip.

    << CPU 2 [Processor 0, Core 0, Thread 1] >>
    < Processor >
    Model: Intel(R) Pentium(R) 4 CPU 3.20GHz
    Speed: 3.21GHz
    Cores per Processor: 1 Unit(s)
    Threads per Core: 2 Unit(s)
    Bus: Intel AGTL+
    Package: FC µPGA478
    Rated Speed/FSB: 3.20GHz / 4x 200MHz
    Multiplier: 16/1x
    Minimum/Maximum Multiplier: 0/1x - 16/1x
    Generation: G8
    Name: P4N (Northwood) Pentium 4C 130nm 1.6-3.4GHz
    1.475-1.575V
    Revision/Stepping: 2 / 9 (9)
    Stepping Mask: D1
    Microcode: MU0F02092E
    Core Voltage Rating: 1.550V
    Maximum Physical / Virtual Add:36-bit / 32-bit
    Native Page Size: 4kB

    < Co-Processor (FPU) >
    Speed: 3.21GHz
    Type: Built-in
    Revision/Stepping: 2 / 9 (9)

    < Cache Information >
    Internal Data Cache: 8kB, Synchronous, Write-Thru, 4-way, 64 byte
    line size, 2 lines per sector
    Internal Trace Cache: 12kB, Synchronous, Write-Thru, 8-way, 64 byte
    line size
    L2 On-board Cache: 512kB, ECC, Synchronous, ATC, 8-way, 64 byte
    line size, 2 lines per sector
    L2 Cache Multiplier: 1/1x

    ***** End of Report *****


    Trotz dem, dass im Report und im Handbuch des Mainboards die Rede ist von 3 GB aufrüstbar und 3 Slots habe ich auf dem Board nur 2 Slots für Memory.
    Ich möchte 2 X 1 GB aufrüsten. Ich bitte euch mir dabei behilflich zu sein welche Memory ich nun brauch.
    Ich hatte schon vom Mediamarkt Verkäufer welchen empfohlen und der ging nicht, genauso von Ebay auch von Micron 2 X 1 GB DDR, 333, 2700 bestellt und der geht auch nicht. Alles probiert einzeln eingebaut usw. Für mein Board gibt es bei Gigybyte kein Support.
    Fujitsu Support antwortet nicht auf meine Email Anfrage und der Technische Telefonische Hotline Suipport speist mich einfach ab mit einer weiteren EXTRA Nummer die mich € 1,21/min oder so kosten würde.
    Im BIOS in den Advanced Chipset Features ist alles auf Auto. Muss ich vielleicht hier auf Manuel und etwas ändern? Habe mich bis jetzt nicht getraut da etwas manuall einzustellen.
    Ich bin Dankbar für jeden Hinweis.

    Liebe Grüsse
    medium


    PS: Hab die Micron 2 X 1 GB DDR, 333, 2700 nochmal reingemacht und CPU Spannung und RAM Spannung etwas erhöht ( mit den alten Riegel 512 MB)und siehe da ich komm schon mal ins BIOS mit den 2 X1 GB Micron was vorher ja den PC nicht mal ins BIOS hochfahren lies.
    Windows fährt aber nicht hoch denn der Bildschirm bleibt schwarz also nicht schwarz wie ohne Strom sondern so nicht ganz schwarz ich hofe man weiss was ich meine.
    IN das F8 Menue komm ich auch rein und wenn ich dann mach Start Windows normaly bleibt er hängen. Wenn ich mach Abgesicherter Modus starter er kurz bis die Zeilen so hochrollen bis zu der Zeile wo es um den AGP gart geht und dann friert er wieder ein.
    Die Micron 2 X 1 GB DDR, 333, 2700 haben beidseitig 8 Banken auf denen steht: 64X8DDR P / 08I6.
    Die Micron 2 X 512 MB die ich grad drin hab haben nur einseitig Banken, solls daran liegen?
    Ich hoffe es sind bekannte Symprome und jemand kann mir sagen was los ist.
  • Laut Diagnoseprogramm steht da aber bei System Memory Controler: Error Corection Capability : None

    Bei dem von Ebay gekauftem Micron steht nix ob ECC oder nicht ECC.
    Also kann man ein ECC DDR Speicher nicht bei einem Board der kein ECC unterstützt reinmachen?