Medion tv und Sat Receiver per hdmi plötzlich nur blaues Bild

  • gelöst
  • Frage

  • haiflosse
  • 3001 Aufrufe 6 Antworten

Diese Seite verwendet Cookies. Durch die Nutzung unserer Seite erklären Sie sich damit einverstanden, dass wir Cookies setzen. Weitere Informationen

Wir weisen ausdrücklich darauf hin, dass Verstösse gegen die Bereichsregeln zu dauerhafter Accountssperre führen können!

  • Medion tv und Sat Receiver per hdmi plötzlich nur blaues Bild

    Ich verwende einen Medion Ferseher und habe per hdmi einen Gigablue Receiver angeschlosse. Es passiert manchmal wenn ich über den Receiver fernsehe das ich plötzlich nur ein blaues Bild bekomme. Erst wenn ich den Source Channel beim tv wieder neu auf hdmi wähle bekomme ich wieder ein Bild.
    Kennt jemand dieses Phänomen und was ich dagegen machen könnte.
    Danke

  • Das Blaue Bild zeigt mir keine Information an.
    Ich habe auch nach allen Log-Dateien gesucht.
    Unter /var/volatile/log kann ich am Receiver eine Datei Messages finden mit folgenden Inhalt

    Quellcode

    1. Jan 1 01:00:21 gbquadplus syslog.info syslogd started: BusyBox v1.23.2
    2. Jan 1 01:00:21 gbquadplus user.notice kernel: klogd started: BusyBox v1.23.2 (2015-07-27 05:15:59 CEST)
    3. Jan 1 01:00:21 gbquadplus user.info kernel: TCP established hash table entries: 8192 (order: 3, 32768 bytes)
    4. Jan 1 01:00:21 gbquadplus user.info kernel: TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
    5. Jan 1 01:00:21 gbquadplus user.info kernel: TCP: Hash tables configured (established 8192 bind 8192)
    6. Jan 1 01:00:21 gbquadplus user.info kernel: TCP: reno registered
    7. Jan 1 01:00:21 gbquadplus user.info kernel: UDP hash table entries: 512 (order: 2, 16384 bytes)
    8. Jan 1 01:00:21 gbquadplus user.info kernel: UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
    9. Jan 1 01:00:21 gbquadplus user.info kernel: NET: Registered protocol family 1
    10. Jan 1 01:00:21 gbquadplus user.info kernel: RPC: Registered named UNIX socket transport module.
    11. Jan 1 01:00:21 gbquadplus user.info kernel: RPC: Registered udp transport module.
    12. Jan 1 01:00:21 gbquadplus user.info kernel: RPC: Registered tcp transport module.
    13. Jan 1 01:00:21 gbquadplus user.info kernel: RPC: Registered tcp NFSv4.1 backchannel transport module.
    14. Jan 1 01:00:21 gbquadplus user.info kernel: futex hash table entries: 512 (order: 4, 65536 bytes)
    15. Jan 1 01:00:21 gbquadplus user.notice kernel: NFS: Registering the id_resolver key type
    16. Jan 1 01:00:21 gbquadplus user.notice kernel: Key type id_resolver registered
    17. Jan 1 01:00:21 gbquadplus user.notice kernel: Key type id_legacy registered
    18. Jan 1 01:00:21 gbquadplus user.info kernel: nfs4filelayout_init: NFSv4 File Layout Driver Registering...
    19. Jan 1 01:00:21 gbquadplus user.info kernel: Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
    20. Jan 1 01:00:21 gbquadplus user.info kernel: fuse init (API version 7.22)
    21. Jan 1 01:00:21 gbquadplus user.info kernel: msgmni has been set to 1116
    22. Jan 1 01:00:21 gbquadplus user.info kernel: io scheduler noop registered
    23. Jan 1 01:00:21 gbquadplus user.info kernel: io scheduler cfq registered (default)
    24. Jan 1 01:00:21 gbquadplus user.info kernel: Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    25. Jan 1 01:00:21 gbquadplus user.info kernel: serial8250.0: ttyS0 at MMIO 0x10406900 (irq = 65, base_baud = 5062500) is a 16550A
    26. Jan 1 01:00:21 gbquadplus user.info kernel: console [ttyS0] enabled
    27. Jan 1 01:00:21 gbquadplus user.info kernel: bootconsole [early0] disabled
    28. Jan 1 01:00:21 gbquadplus user.info kernel: serial8250.0: ttyS1 at MMIO 0x10406940 (irq = 66, base_baud = 5062500) is a 16550A
    29. Jan 1 01:00:21 gbquadplus user.info kernel: serial8250.0: ttyS2 at MMIO 0x10406980 (irq = 67, base_baud = 5062500) is a 16550A
    30. Jan 1 01:00:21 gbquadplus user.info kernel: loop: module loaded
    31. Jan 1 01:00:21 gbquadplus user.err kernel: ahci strict-ahci.0: can't get clock
    32. Jan 1 01:00:21 gbquadplus user.debug kernel: __clk_enable: sata [1]
    33. Jan 1 01:00:21 gbquadplus user.debug kernel: bcm40nm_pm_sata_enable 00
    34. Jan 1 01:00:21 gbquadplus user.info kernel: ahci strict-ahci.0: SSS flag set, parallel bus scan disabled
    35. Jan 1 01:00:21 gbquadplus user.info kernel: ahci strict-ahci.0: AHCI 0001.0300 32 slots 3 ports 6 Gbps 0x3 impl platform mode
    36. Jan 1 01:00:21 gbquadplus user.info kernel: ahci strict-ahci.0: flags: sntf stag clo pmp slum part
    37. Jan 1 01:00:21 gbquadplus user.info kernel: scsi0 : ahci_platform
    38. Jan 1 01:00:21 gbquadplus user.info kernel: scsi1 : ahci_platform
    39. Jan 1 01:00:21 gbquadplus user.info kernel: scsi2 : ahci_platform
    40. Jan 1 01:00:21 gbquadplus user.info kernel: ata1: SATA max UDMA/133 mmio [mem 0x10181000-0x10190fff] port 0x100 irq 41
    41. Jan 1 01:00:21 gbquadplus user.info kernel: ata2: SATA max UDMA/133 mmio [mem 0x10181000-0x10190fff] port 0x180 irq 41
    42. Jan 1 01:00:21 gbquadplus user.info kernel: ata3: DUMMY
    43. Jan 1 01:00:21 gbquadplus user.info kernel: brcmstb_nand: NAND controller driver is loaded
    44. Jan 1 01:00:21 gbquadplus user.debug kernel: __clk_enable: network [1]
    45. Jan 1 01:00:21 gbquadplus user.debug kernel: __clk_enable: enet [1]
    46. Jan 1 01:00:21 gbquadplus user.debug kernel: bcm40nm_pm_genet_enable 00
    47. Jan 1 01:00:21 gbquadplus user.crit kernel: Found PHY at Address 3
    48. Jan 1 01:00:21 gbquadplus user.info kernel: bcmgenet: configuring instance #0 for external RGMII
    49. Jan 1 01:00:21 gbquadplus user.info kernel: ata1: SATA link down (SStatus 0 SControl 300)
    50. Jan 1 01:00:21 gbquadplus user.debug kernel: __clk_disable: enet [0]
    51. Jan 1 01:00:21 gbquadplus user.debug kernel: bcm40nm_pm_genet_disable 00
    52. Jan 1 01:00:21 gbquadplus user.debug kernel: __clk_disable: network [0]
    53. Jan 1 01:00:21 gbquadplus user.debug kernel: __clk_enable: network [1]
    54. Jan 1 01:00:21 gbquadplus user.debug kernel: __clk_enable: moca_genet [1]
    55. Jan 1 01:00:21 gbquadplus user.debug kernel: bcm40nm_pm_genet1_enable 00
    56. Jan 1 01:00:21 gbquadplus user.debug kernel: __clk_enable: moca [1]
    57. Jan 1 01:00:21 gbquadplus user.debug kernel: bcm40nm_pm_moca_enable 00
    58. Jan 1 01:00:21 gbquadplus user.info kernel: ata2: SATA link down (SStatus 0 SControl 300)
    59. Jan 1 01:00:21 gbquadplus user.err kernel: No PHY detected, not registering interface:1
    60. Jan 1 01:00:21 gbquadplus user.debug kernel: __clk_disable: moca [0]
    61. Jan 1 01:00:21 gbquadplus user.debug kernel: bcm40nm_pm_moca_disable 00
    62. Jan 1 01:00:21 gbquadplus user.debug kernel: __clk_disable: moca_genet [0]
    63. Jan 1 01:00:21 gbquadplus user.debug kernel: bcm40nm_pm_genet1_disable 00
    64. Jan 1 01:00:21 gbquadplus user.debug kernel: __clk_disable: network [0]
    65. Jan 1 01:00:21 gbquadplus user.warn kernel: bcmgenet: probe of bcmgenet.1 failed with error -5
    66. Jan 1 01:00:21 gbquadplus user.info kernel: usbcore: registered new interface driver zd1201
    67. Jan 1 01:00:21 gbquadplus user.info kernel: ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    68. Jan 1 01:00:21 gbquadplus user.debug kernel: __clk_enable: usb [1]
    69. Jan 1 01:00:21 gbquadplus user.debug kernel: bcm40nm_pm_usb_enable 00
    70. Jan 1 01:00:21 gbquadplus user.info kernel: ehci-brcm ehci-brcm.0: Broadcom STB EHCI
    71. Jan 1 01:00:21 gbquadplus user.info kernel: ehci-brcm ehci-brcm.0: new USB bus registered, assigned bus number 1
    72. Jan 1 01:00:21 gbquadplus user.info kernel: ehci-brcm ehci-brcm.0: irq 69, io mem 0x10480300
    73. Jan 1 01:00:21 gbquadplus user.info kernel: ehci-brcm ehci-brcm.0: USB 0.0 started, EHCI 1.00
    74. Jan 1 01:00:21 gbquadplus user.info kernel: hub 1-0:1.0: USB hub found
    75. Jan 1 01:00:21 gbquadplus user.info kernel: hub 1-0:1.0: 1 port detected
    76. Jan 1 01:00:21 gbquadplus user.info kernel: ehci-brcm ehci-brcm.1: Broadcom STB EHCI
    77. Jan 1 01:00:21 gbquadplus user.info kernel: ehci-brcm ehci-brcm.1: new USB bus registered, assigned bus number 2
    78. Jan 1 01:00:21 gbquadplus user.info kernel: ehci-brcm ehci-brcm.1: irq 70, io mem 0x10480500
    79. Jan 1 01:00:21 gbquadplus user.info kernel: ehci-brcm ehci-brcm.1: USB 0.0 started, EHCI 1.00
    80. Jan 1 01:00:21 gbquadplus user.info kernel: hub 2-0:1.0: USB hub found
    81. Jan 1 01:00:21 gbquadplus user.info kernel: hub 2-0:1.0: 1 port detected
    82. Jan 1 01:00:21 gbquadplus user.info kernel: ehci-brcm ehci-brcm.2: Broadcom STB EHCI
    83. Jan 1 01:00:21 gbquadplus user.info kernel: ehci-brcm ehci-brcm.2: new USB bus registered, assigned bus number 3
    84. Jan 1 01:00:21 gbquadplus user.info kernel: ehci-brcm ehci-brcm.2: irq 74, io mem 0x10490300
    85. Jan 1 01:00:21 gbquadplus user.info kernel: ehci-brcm ehci-brcm.2: USB 0.0 started, EHCI 1.00
    86. Jan 1 01:00:21 gbquadplus user.info kernel: hub 3-0:1.0: USB hub found
    87. Jan 1 01:00:21 gbquadplus user.info kernel: hub 3-0:1.0: 1 port detected
    88. Jan 1 01:00:21 gbquadplus user.info kernel: ehci-brcm ehci-brcm.3: Broadcom STB EHCI
    89. Jan 1 01:00:21 gbquadplus user.info kernel: ehci-brcm ehci-brcm.3: new USB bus registered, assigned bus number 4
    90. Jan 1 01:00:21 gbquadplus user.info kernel: ehci-brcm ehci-brcm.3: irq 75, io mem 0x10490500
    91. Jan 1 01:00:21 gbquadplus user.info kernel: ehci-brcm ehci-brcm.3: USB 0.0 started, EHCI 1.00
    92. Jan 1 01:00:21 gbquadplus user.info kernel: hub 4-0:1.0: USB hub found
    93. Jan 1 01:00:21 gbquadplus user.info kernel: hub 4-0:1.0: 1 port detected
    94. Jan 1 01:00:21 gbquadplus user.info kernel: ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
    95. Jan 1 01:00:21 gbquadplus user.info kernel: ohci-brcm ohci-brcm.0: Broadcom STB OHCI
    96. Jan 1 01:00:21 gbquadplus user.info kernel: ohci-brcm ohci-brcm.0: new USB bus registered, assigned bus number 5
    97. Jan 1 01:00:21 gbquadplus user.info kernel: ohci-brcm ohci-brcm.0: irq 71, io mem 0x10480400
    98. Jan 1 01:00:21 gbquadplus user.info kernel: hub 5-0:1.0: USB hub found
    99. Jan 1 01:00:21 gbquadplus user.info kernel: hub 5-0:1.0: 1 port detected
    100. Jan 1 01:00:21 gbquadplus user.info kernel: ohci-brcm ohci-brcm.1: Broadcom STB OHCI
    101. Jan 1 01:00:21 gbquadplus user.info kernel: ohci-brcm ohci-brcm.1: new USB bus registered, assigned bus number 6
    102. Jan 1 01:00:21 gbquadplus user.info kernel: ohci-brcm ohci-brcm.1: irq 72, io mem 0x10480600
    103. Jan 1 01:00:21 gbquadplus user.info kernel: hub 6-0:1.0: USB hub found
    104. Jan 1 01:00:21 gbquadplus user.info kernel: hub 6-0:1.0: 1 port detected
    105. Jan 1 01:00:21 gbquadplus user.info kernel: ohci-brcm ohci-brcm.2: Broadcom STB OHCI
    106. Jan 1 01:00:21 gbquadplus user.info kernel: ohci-brcm ohci-brcm.2: new USB bus registered, assigned bus number 7
    107. Jan 1 01:00:21 gbquadplus user.info kernel: ohci-brcm ohci-brcm.2: irq 76, io mem 0x10490400
    108. Jan 1 01:00:21 gbquadplus user.info kernel: hub 7-0:1.0: USB hub found
    109. Jan 1 01:00:21 gbquadplus user.info kernel: hub 7-0:1.0: 1 port detected
    110. Jan 1 01:00:21 gbquadplus user.info kernel: ohci-brcm ohci-brcm.3: Broadcom STB OHCI
    111. Jan 1 01:00:21 gbquadplus user.info kernel: ohci-brcm ohci-brcm.3: new USB bus registered, assigned bus number 8
    112. Jan 1 01:00:21 gbquadplus user.info kernel: ohci-brcm ohci-brcm.3: irq 77, io mem 0x10490600
    113. Jan 1 01:00:21 gbquadplus user.info kernel: hub 8-0:1.0: USB hub found
    114. Jan 1 01:00:21 gbquadplus user.info kernel: hub 8-0:1.0: 1 port detected
    115. Jan 1 01:00:21 gbquadplus user.info kernel: usbcore: registered new interface driver usb-storage
    116. Jan 1 01:00:21 gbquadplus user.info kernel: mousedev: PS/2 mouse device common for all mice
    117. Jan 1 01:00:21 gbquadplus user.info kernel: i2c /dev entries driver
    118. Jan 1 01:00:21 gbquadplus user.info kernel: usbcore: registered new interface driver btusb
    119. Jan 1 01:00:21 gbquadplus user.info kernel: hidraw: raw HID events driver (C) Jiri Kosina
    120. Jan 1 01:00:21 gbquadplus user.info kernel: usbcore: registered new interface driver usbhid
    121. Jan 1 01:00:21 gbquadplus user.info kernel: usbhid: USB HID core driver
    122. Jan 1 01:00:21 gbquadplus user.info kernel: TCP: cubic registered
    123. Jan 1 01:00:21 gbquadplus user.info kernel: NET: Registered protocol family 10
    124. Jan 1 01:00:21 gbquadplus user.info kernel: NET: Registered protocol family 17
    125. Jan 1 01:00:21 gbquadplus user.info kernel: Bluetooth: HIDP (Human Interface Emulation) ver 1.2
    126. Jan 1 01:00:21 gbquadplus user.info kernel: Bluetooth: HIDP socket layer initialized
    127. Jan 1 01:00:21 gbquadplus user.info kernel: l2tp_core: L2TP core driver, V2.0
    128. Jan 1 01:00:21 gbquadplus user.notice kernel: Key type dns_resolver registered
    129. Jan 1 01:00:21 gbquadplus user.info kernel: PM: CP0 COUNT/COMPARE frequency does not depend on divisor
    130. Jan 1 01:00:21 gbquadplus user.info kernel: EBI CS0: setting up NAND flash (primary)
    131. Jan 1 01:00:21 gbquadplus user.info kernel: nand: device found, Manufacturer ID: 0x01, Chip ID: 0xdc
    132. Jan 1 01:00:21 gbquadplus user.info kernel: nand: AMD/Spansion S34ML04G1
    133. Jan 1 01:00:21 gbquadplus user.info kernel: nand: 512MiB, SLC, page size: 2048, OOB size: 64
    134. Jan 1 01:00:21 gbquadplus user.info kernel: nand: device found, Manufacturer ID: 0x01, Chip ID: 0xdc
    135. Jan 1 01:00:21 gbquadplus user.info kernel: nand: AMD/Spansion S34ML04G1
    136. Jan 1 01:00:21 gbquadplus user.info kernel: nand: 512MiB, SLC, page size: 2048, OOB size: 64
    137. Jan 1 01:00:21 gbquadplus user.info kernel: brcmnand brcmnand.0: 512MiB total, 128KiB blocks, 2KiB pages, 16B OOB, 8-bit, Hamming ECC
    138. Jan 1 01:00:21 gbquadplus user.info kernel: Bad block table found at page 262080, version 0x01
    139. Jan 1 01:00:21 gbquadplus user.info kernel: Bad block table found at page 262016, version 0x01
    140. Jan 1 01:00:21 gbquadplus user.notice kernel: Creating 4 MTD partitions on "brcmnand.0":
    141. Jan 1 01:00:21 gbquadplus user.notice kernel: 0x000000e00000-0x00001fc00000 : "rootfs"
    142. Jan 1 01:00:21 gbquadplus user.notice kernel: 0x000000e00000-0x00001fc00000 : "rootfs(redundant)"
    143. Jan 1 01:00:21 gbquadplus user.notice kernel: 0x000000200000-0x000000900000 : "kernel"
    144. Jan 1 01:00:21 gbquadplus user.notice kernel: 0x000000900000-0x000000a00000 : "mac"
    145. Jan 1 01:00:21 gbquadplus user.notice kernel: UBI: attaching mtd0 to ubi0
    146. Jan 1 01:00:21 gbquadplus user.notice kernel: random: nonblocking pool is initialized
    147. Jan 1 01:00:21 gbquadplus user.notice kernel: UBI: scanning is finished
    148. Jan 1 01:00:21 gbquadplus user.notice kernel: UBI: attached mtd0 (name "rootfs", size 494 MiB) to ubi0
    149. Jan 1 01:00:21 gbquadplus user.notice kernel: UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
    150. Jan 1 01:00:21 gbquadplus user.notice kernel: UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
    151. Jan 1 01:00:21 gbquadplus user.notice kernel: UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
    152. Jan 1 01:00:21 gbquadplus user.notice kernel: UBI: good PEBs: 3952, bad PEBs: 0, corrupted PEBs: 0
    153. Jan 1 01:00:21 gbquadplus user.notice kernel: UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
    154. Jan 1 01:00:21 gbquadplus user.notice kernel: UBI: max/mean erase counter: 4/1, WL threshold: 4096, image sequence number: 207911620
    155. Jan 1 01:00:21 gbquadplus user.notice kernel: UBI: available PEBs: 0, total reserved PEBs: 3952, PEBs reserved for bad PEB handling: 80
    156. Jan 1 01:00:21 gbquadplus user.info kernel: ALSA device list:
    157. Jan 1 01:00:21 gbquadplus user.info kernel: No soundcards found.
    158. Jan 1 01:00:21 gbquadplus user.notice kernel: UBI: background thread "ubi_bgt0d" started, PID 58
    159. Jan 1 01:00:21 gbquadplus user.notice kernel: UBIFS: background thread "ubifs_bgt0_0" started, PID 59
    160. Jan 1 01:00:21 gbquadplus user.notice kernel: UBIFS: recovery needed
    161. Jan 1 01:00:21 gbquadplus user.notice kernel: UBIFS: recovery completed
    162. Jan 1 01:00:21 gbquadplus user.notice kernel: UBIFS: mounted UBI device 0, volume 0, name "rootfs"
    163. Jan 1 01:00:21 gbquadplus user.notice kernel: UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
    164. Jan 1 01:00:21 gbquadplus user.notice kernel: UBIFS: FS size: 489746432 bytes (467 MiB, 3857 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
    165. Jan 1 01:00:21 gbquadplus user.notice kernel: UBIFS: reserved for root: 0 bytes (0 KiB)
    166. Jan 1 01:00:21 gbquadplus user.notice kernel: UBIFS: media format: w4/r0 (latest is w4/r0), UUID 0D3D7BB8-4210-4C23-B3E1-000BC3667C28, small LPT model
    167. Jan 1 01:00:21 gbquadplus user.info kernel: VFS: Mounted root (ubifs filesystem) on device 0:11.
    168. Jan 1 01:00:21 gbquadplus user.info kernel: devtmpfs: mounted
    169. Jan 1 01:00:21 gbquadplus user.info kernel: Freeing unused kernel memory: 276K (8089b000 - 808e0000)
    170. Jan 1 01:00:21 gbquadplus user.info kernel: usbcore: registered new interface driver rtl8192cu
    171. Jan 1 01:00:21 gbquadplus user.info kernel: usb 4-1: new high-speed USB device number 2 using ehci-brcm
    172. Jan 1 01:00:21 gbquadplus user.info kernel: usb-storage 4-1:1.0: USB Mass Storage device detected
    173. Jan 1 01:00:21 gbquadplus user.info kernel: usb-storage 4-1:1.0: Quirks match for vid 152d pid 2329: 8020
    174. Jan 1 01:00:21 gbquadplus user.info kernel: scsi3 : usb-storage 4-1:1.0
    175. Jan 1 01:00:21 gbquadplus user.warn kernel: version: 20150607153448-14.2
    176. Jan 1 01:00:21 gbquadplus user.notice kernel: scsi 3:0:0:0: Direct-Access WDC WD50 00AAKS-00YGA0 PQ: 0 ANSI: 2 CCS
    177. Jan 1 01:00:21 gbquadplus user.notice kernel: sd 3:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
    178. Jan 1 01:00:21 gbquadplus user.notice kernel: sd 3:0:0:0: [sda] Write Protect is off
    179. Jan 1 01:00:21 gbquadplus user.debug kernel: sd 3:0:0:0: [sda] Mode Sense: 28 00 00 00
    180. Jan 1 01:00:21 gbquadplus user.notice kernel: sd 3:0:0:0: Attached scsi generic sg0 type 0
    181. Jan 1 01:00:21 gbquadplus user.err kernel: sd 3:0:0:0: [sda] No Caching mode page found
    182. Jan 1 01:00:21 gbquadplus user.err kernel: sd 3:0:0:0: [sda] Assuming drive cache: write through
    183. Jan 1 01:00:21 gbquadplus user.err kernel: sd 3:0:0:0: [sda] No Caching mode page found
    184. Jan 1 01:00:21 gbquadplus user.err kernel: sd 3:0:0:0: [sda] Assuming drive cache: write through
    185. Jan 1 01:00:21 gbquadplus user.info kernel: sda: sda1
    186. Jan 1 01:00:21 gbquadplus user.err kernel: sd 3:0:0:0: [sda] No Caching mode page found
    187. Jan 1 01:00:21 gbquadplus user.err kernel: sd 3:0:0:0: [sda] Assuming drive cache: write through
    188. Jan 1 01:00:21 gbquadplus user.notice kernel: sd 3:0:0:0: [sda] Attached SCSI disk
    189. Jan 1 01:00:21 gbquadplus user.warn kernel: LCD: ILI9327
    190. Jan 1 01:00:21 gbquadplus user.warn kernel: EXT4-fs (sda1): warning: maximal mount count reached, running e2fsck is recommended
    191. Jan 1 01:00:21 gbquadplus user.info kernel: EXT4-fs (sda1): recovery complete
    192. Jan 1 01:00:21 gbquadplus user.info kernel: EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
    193. Jan 1 01:00:21 gbquadplus user.info kernel: input: gigablue remote control as /devices/virtual/input/input0
    194. Jan 1 01:00:21 gbquadplus user.info kernel: DVB: registering new adapter (gbquadplus)
    195. Jan 1 01:00:21 gbquadplus user.info kernel: dvb dvb.0: DVB: registering adapter 0 frontend 0 (BCM7346 DVB-S2 NIM (internal))...
    196. Jan 1 01:00:21 gbquadplus user.info kernel: dvb dvb.0: DVB: registering adapter 0 frontend 0 (BCM7346 DVB-S2 NIM (internal))...
    197. Jan 1 01:00:21 gbquadplus user.info kernel: dvb dvb.0: DVB: registering adapter 0 frontend 0 (GIGA DVB-C/T2 NIM (SI4768))...
    198. Jan 1 01:00:21 gbquadplus user.info kernel: dvb dvb.0: DVB: registering adapter 0 frontend 0 (GIGA DVB-C/T2 NIM (SI4768))...
    Alles anzeigen


    Vielleicht steht hier der Fehler.
    Danke

  • Auf welche Quelle springt denn dein Medion TV um? Ich sehe die Problematik nicht unbedingt an der Gigablue.
    Du schreibst das du den Bluescreen am TV bekommst. OK..Logischerweise meistens wenn der TV auf eine Quelle umspringt an der nix angeschlossen ist!
    Bevor du wieder auf HDMI schaltest...Auf welcher Source steht denn dann der Medion TV?
    Sollte deine Gigablue an einem HDMI/MHL Port angeschlossen sein, würde ich mal einen anderen Port verwenden insofern an deinem TV vorhanden
    I can accept failure, everyone fails at something. But I can't accept not trying

  • Viele Fernseher haben den sogenannten "Hotel-Modus". Damit kannst Du z.B. auch einstellen, dass das
    Gerät immer mit z.B. HDMI3 startet.

    Bei meinem Panasonic-Viera hab' ich das auch gemacht. HDMI1 ist der Master beim Starten. :)

    Googel mal, ob's für Deinen TV auch die Möglichkeit gibt. Wenn ja, die verschiedenen Ports ausprobieren.

    MfG