matthiasle
Registered +
- Registriert
- Nov. 2008
- Beiträge
- 187
Markus83Muc schrieb:Du kannst auch Problemlos RAM mit höherem Takt verwenden, das eine Kopplung zwischen RAM und CPU Voltage besteht wurde am Anfang behauptet, stimmt aber so nicht.
Frage hast du einen i7?
Ich habe die Erfahrung gemacht das OCZ Speicher der mit 1,9V Spannung läuft definitiv zu Systemabstürzen führt (selber erlebt!). Daher empfehle ich Speicher zu verwenden der mit 1,65V Spannung läuft nicht umsonst wird auf den meisten Onlineshops mit dem Vermerk "ideal zu den Core i7 CPUs" geworben!
Also wer ein stabiles System haben möchte der sollte auf die RAM Spannung achten.
Hatte das Problem auch mal hier gepostet!
While we were fearful about the memory overclockability of Core i7 CPUs we've found this not to be the case - we've hit 1,600MHz without even breaking a sweat on pre-production BIOSes and companies are already launching triple channel memory kits that are hitting 2,000MHz at a record low 1.65V. You can push the memory voltage, but Intel performance guru François Piednoel was keen to stress that the CPU voltage must be kept within a 0.5V potential difference to memory.
With CPU stock voltages at sub 1.2V this only allows an upper safe maximum of ~1.65-1.7V, however increase the CPU voltage to 1.4 or 1.5 (or more) with some extreme cooling (remember these CPUs are rated at a 130W TDP at ~1.2V) and you give yourself more breathing room to 1.9-2.0V on the memory.
That's not to say that exceeding the 0.5V rule will instantly kill a CPU, but it's like the effect of excessive VTT or PLL voltages to current Penryn CPUs - don't be surprised if they die without warning much sooner than you expect. By that rationale, AMD's Athlon 64s suffered the same fate with DDR2, but the effect was often exacerbated because the initial voltage difference was that much greater to begin with and greatly overvolting the memory to 2.3+V made it that much worse.
Hier wird das Problem erläutert das der CPU i7 nur für einen Arbeitsspeicher mit einer Spannung von max 1,65V ausgelegt ist.
Solltest man die CPU Spannung erhöhen 1,5V dann kannst du auch Speicher mit 1,9V betreiben. Soweit ich mich belesen habe soll man die Spannung nicht höher wie 1,3V setzen da der i7 unter Vollast (bei Spiele) sehr heiß wird auch mit einem sehr guten Kühler soll man ca. 10Grad unter der maximalen Wärme liegen. Ich habe mein System nicht übertaktet und er ist trotzdem verdammt schnell.
VG
