Medion tv und Sat Receiver per hdmi plötzlich nur blaues Bild gelöst

haiflosse · 12. Feb. 2016

Ich verwende einen Medion Ferseher und habe per hdmi einen Gigablue Receiver angeschlosse. Es passiert manchmal wenn ich über den Receiver fernsehe das ich plötzlich nur ein blaues Bild bekomme. Erst wenn ich den Source Channel beim tv wieder neu auf hdmi wähle bekomme ich wieder ein Bild.
Kennt jemand dieses Phänomen und was ich dagegen machen könnte.
Danke

Dracul1593 · 13. Feb. 2016

Zeit dir das Blaue Bild Informationen an ?
Hast du einen Log? Normal unter /root/log zu finden oder unter /tmp oder /media/hdd(usb)

haiflosse · 13. Feb. 2016

Das Blaue Bild zeigt mir keine Information an.
Ich habe auch nach allen Log-Dateien gesucht.
Unter /var/volatile/log kann ich am Receiver eine Datei Messages finden mit folgenden Inhalt

Code:

Jan 1 01:00:21 gbquadplus syslog.info syslogd started: BusyBox v1.23.2
Jan 1 01:00:21 gbquadplus user.notice kernel: klogd started: BusyBox v1.23.2 (2015-07-27 05:15:59 CEST)
Jan 1 01:00:21 gbquadplus user.info kernel: TCP established hash table entries: 8192 (order: 3, 32768 bytes)
Jan 1 01:00:21 gbquadplus user.info kernel: TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
Jan 1 01:00:21 gbquadplus user.info kernel: TCP: Hash tables configured (established 8192 bind 8192)
Jan 1 01:00:21 gbquadplus user.info kernel: TCP: reno registered
Jan 1 01:00:21 gbquadplus user.info kernel: UDP hash table entries: 512 (order: 2, 16384 bytes)
Jan 1 01:00:21 gbquadplus user.info kernel: UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
Jan 1 01:00:21 gbquadplus user.info kernel: NET: Registered protocol family 1
Jan 1 01:00:21 gbquadplus user.info kernel: RPC: Registered named UNIX socket transport module.
Jan 1 01:00:21 gbquadplus user.info kernel: RPC: Registered udp transport module.
Jan 1 01:00:21 gbquadplus user.info kernel: RPC: Registered tcp transport module.
Jan 1 01:00:21 gbquadplus user.info kernel: RPC: Registered tcp NFSv4.1 backchannel transport module.
Jan 1 01:00:21 gbquadplus user.info kernel: futex hash table entries: 512 (order: 4, 65536 bytes)
Jan 1 01:00:21 gbquadplus user.notice kernel: NFS: Registering the id_resolver key type
Jan 1 01:00:21 gbquadplus user.notice kernel: Key type id_resolver registered
Jan 1 01:00:21 gbquadplus user.notice kernel: Key type id_legacy registered
Jan 1 01:00:21 gbquadplus user.info kernel: nfs4filelayout_init: NFSv4 File Layout Driver Registering...
Jan 1 01:00:21 gbquadplus user.info kernel: Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
Jan 1 01:00:21 gbquadplus user.info kernel: fuse init (API version 7.22)
Jan 1 01:00:21 gbquadplus user.info kernel: msgmni has been set to 1116
Jan 1 01:00:21 gbquadplus user.info kernel: io scheduler noop registered
Jan 1 01:00:21 gbquadplus user.info kernel: io scheduler cfq registered (default)
Jan 1 01:00:21 gbquadplus user.info kernel: Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
Jan 1 01:00:21 gbquadplus user.info kernel: serial8250.0: ttyS0 at MMIO 0x10406900 (irq = 65, base_baud = 5062500) is a 16550A
Jan 1 01:00:21 gbquadplus user.info kernel: console [ttyS0] enabled
Jan 1 01:00:21 gbquadplus user.info kernel: bootconsole [early0] disabled
Jan 1 01:00:21 gbquadplus user.info kernel: serial8250.0: ttyS1 at MMIO 0x10406940 (irq = 66, base_baud = 5062500) is a 16550A
Jan 1 01:00:21 gbquadplus user.info kernel: serial8250.0: ttyS2 at MMIO 0x10406980 (irq = 67, base_baud = 5062500) is a 16550A
Jan 1 01:00:21 gbquadplus user.info kernel: loop: module loaded
Jan 1 01:00:21 gbquadplus user.err kernel: ahci strict-ahci.0: can't get clock
Jan 1 01:00:21 gbquadplus user.debug kernel: __clk_enable: sata [1]
Jan 1 01:00:21 gbquadplus user.debug kernel: bcm40nm_pm_sata_enable 00
Jan 1 01:00:21 gbquadplus user.info kernel: ahci strict-ahci.0: SSS flag set, parallel bus scan disabled
Jan 1 01:00:21 gbquadplus user.info kernel: ahci strict-ahci.0: AHCI 0001.0300 32 slots 3 ports 6 Gbps 0x3 impl platform mode
Jan 1 01:00:21 gbquadplus user.info kernel: ahci strict-ahci.0: flags: sntf stag clo pmp slum part 
Jan 1 01:00:21 gbquadplus user.info kernel: scsi0 : ahci_platform
Jan 1 01:00:21 gbquadplus user.info kernel: scsi1 : ahci_platform
Jan 1 01:00:21 gbquadplus user.info kernel: scsi2 : ahci_platform
Jan 1 01:00:21 gbquadplus user.info kernel: ata1: SATA max UDMA/133 mmio [mem 0x10181000-0x10190fff] port 0x100 irq 41
Jan 1 01:00:21 gbquadplus user.info kernel: ata2: SATA max UDMA/133 mmio [mem 0x10181000-0x10190fff] port 0x180 irq 41
Jan 1 01:00:21 gbquadplus user.info kernel: ata3: DUMMY
Jan 1 01:00:21 gbquadplus user.info kernel: brcmstb_nand: NAND controller driver is loaded
Jan 1 01:00:21 gbquadplus user.debug kernel: __clk_enable: network [1]
Jan 1 01:00:21 gbquadplus user.debug kernel: __clk_enable: enet [1]
Jan 1 01:00:21 gbquadplus user.debug kernel: bcm40nm_pm_genet_enable 00
Jan 1 01:00:21 gbquadplus user.crit kernel: Found PHY at Address 3
Jan 1 01:00:21 gbquadplus user.info kernel: bcmgenet: configuring instance #0 for external RGMII
Jan 1 01:00:21 gbquadplus user.info kernel: ata1: SATA link down (SStatus 0 SControl 300)
Jan 1 01:00:21 gbquadplus user.debug kernel: __clk_disable: enet [0]
Jan 1 01:00:21 gbquadplus user.debug kernel: bcm40nm_pm_genet_disable 00
Jan 1 01:00:21 gbquadplus user.debug kernel: __clk_disable: network [0]
Jan 1 01:00:21 gbquadplus user.debug kernel: __clk_enable: network [1]
Jan 1 01:00:21 gbquadplus user.debug kernel: __clk_enable: moca_genet [1]
Jan 1 01:00:21 gbquadplus user.debug kernel: bcm40nm_pm_genet1_enable 00
Jan 1 01:00:21 gbquadplus user.debug kernel: __clk_enable: moca [1]
Jan 1 01:00:21 gbquadplus user.debug kernel: bcm40nm_pm_moca_enable 00
Jan 1 01:00:21 gbquadplus user.info kernel: ata2: SATA link down (SStatus 0 SControl 300)
Jan 1 01:00:21 gbquadplus user.err kernel: No PHY detected, not registering interface:1
Jan 1 01:00:21 gbquadplus user.debug kernel: __clk_disable: moca [0]
Jan 1 01:00:21 gbquadplus user.debug kernel: bcm40nm_pm_moca_disable 00
Jan 1 01:00:21 gbquadplus user.debug kernel: __clk_disable: moca_genet [0]
Jan 1 01:00:21 gbquadplus user.debug kernel: bcm40nm_pm_genet1_disable 00
Jan 1 01:00:21 gbquadplus user.debug kernel: __clk_disable: network [0]
Jan 1 01:00:21 gbquadplus user.warn kernel: bcmgenet: probe of bcmgenet.1 failed with error -5
Jan 1 01:00:21 gbquadplus user.info kernel: usbcore: registered new interface driver zd1201
Jan 1 01:00:21 gbquadplus user.info kernel: ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Jan 1 01:00:21 gbquadplus user.debug kernel: __clk_enable: usb [1]
Jan 1 01:00:21 gbquadplus user.debug kernel: bcm40nm_pm_usb_enable 00
Jan 1 01:00:21 gbquadplus user.info kernel: ehci-brcm ehci-brcm.0: Broadcom STB EHCI
Jan 1 01:00:21 gbquadplus user.info kernel: ehci-brcm ehci-brcm.0: new USB bus registered, assigned bus number 1
Jan 1 01:00:21 gbquadplus user.info kernel: ehci-brcm ehci-brcm.0: irq 69, io mem 0x10480300
Jan 1 01:00:21 gbquadplus user.info kernel: ehci-brcm ehci-brcm.0: USB 0.0 started, EHCI 1.00
Jan 1 01:00:21 gbquadplus user.info kernel: hub 1-0:1.0: USB hub found
Jan 1 01:00:21 gbquadplus user.info kernel: hub 1-0:1.0: 1 port detected
Jan 1 01:00:21 gbquadplus user.info kernel: ehci-brcm ehci-brcm.1: Broadcom STB EHCI
Jan 1 01:00:21 gbquadplus user.info kernel: ehci-brcm ehci-brcm.1: new USB bus registered, assigned bus number 2
Jan 1 01:00:21 gbquadplus user.info kernel: ehci-brcm ehci-brcm.1: irq 70, io mem 0x10480500
Jan 1 01:00:21 gbquadplus user.info kernel: ehci-brcm ehci-brcm.1: USB 0.0 started, EHCI 1.00
Jan 1 01:00:21 gbquadplus user.info kernel: hub 2-0:1.0: USB hub found
Jan 1 01:00:21 gbquadplus user.info kernel: hub 2-0:1.0: 1 port detected
Jan 1 01:00:21 gbquadplus user.info kernel: ehci-brcm ehci-brcm.2: Broadcom STB EHCI
Jan 1 01:00:21 gbquadplus user.info kernel: ehci-brcm ehci-brcm.2: new USB bus registered, assigned bus number 3
Jan 1 01:00:21 gbquadplus user.info kernel: ehci-brcm ehci-brcm.2: irq 74, io mem 0x10490300
Jan 1 01:00:21 gbquadplus user.info kernel: ehci-brcm ehci-brcm.2: USB 0.0 started, EHCI 1.00
Jan 1 01:00:21 gbquadplus user.info kernel: hub 3-0:1.0: USB hub found
Jan 1 01:00:21 gbquadplus user.info kernel: hub 3-0:1.0: 1 port detected
Jan 1 01:00:21 gbquadplus user.info kernel: ehci-brcm ehci-brcm.3: Broadcom STB EHCI
Jan 1 01:00:21 gbquadplus user.info kernel: ehci-brcm ehci-brcm.3: new USB bus registered, assigned bus number 4
Jan 1 01:00:21 gbquadplus user.info kernel: ehci-brcm ehci-brcm.3: irq 75, io mem 0x10490500
Jan 1 01:00:21 gbquadplus user.info kernel: ehci-brcm ehci-brcm.3: USB 0.0 started, EHCI 1.00
Jan 1 01:00:21 gbquadplus user.info kernel: hub 4-0:1.0: USB hub found
Jan 1 01:00:21 gbquadplus user.info kernel: hub 4-0:1.0: 1 port detected
Jan 1 01:00:21 gbquadplus user.info kernel: ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
Jan 1 01:00:21 gbquadplus user.info kernel: ohci-brcm ohci-brcm.0: Broadcom STB OHCI
Jan 1 01:00:21 gbquadplus user.info kernel: ohci-brcm ohci-brcm.0: new USB bus registered, assigned bus number 5
Jan 1 01:00:21 gbquadplus user.info kernel: ohci-brcm ohci-brcm.0: irq 71, io mem 0x10480400
Jan 1 01:00:21 gbquadplus user.info kernel: hub 5-0:1.0: USB hub found
Jan 1 01:00:21 gbquadplus user.info kernel: hub 5-0:1.0: 1 port detected
Jan 1 01:00:21 gbquadplus user.info kernel: ohci-brcm ohci-brcm.1: Broadcom STB OHCI
Jan 1 01:00:21 gbquadplus user.info kernel: ohci-brcm ohci-brcm.1: new USB bus registered, assigned bus number 6
Jan 1 01:00:21 gbquadplus user.info kernel: ohci-brcm ohci-brcm.1: irq 72, io mem 0x10480600
Jan 1 01:00:21 gbquadplus user.info kernel: hub 6-0:1.0: USB hub found
Jan 1 01:00:21 gbquadplus user.info kernel: hub 6-0:1.0: 1 port detected
Jan 1 01:00:21 gbquadplus user.info kernel: ohci-brcm ohci-brcm.2: Broadcom STB OHCI
Jan 1 01:00:21 gbquadplus user.info kernel: ohci-brcm ohci-brcm.2: new USB bus registered, assigned bus number 7
Jan 1 01:00:21 gbquadplus user.info kernel: ohci-brcm ohci-brcm.2: irq 76, io mem 0x10490400
Jan 1 01:00:21 gbquadplus user.info kernel: hub 7-0:1.0: USB hub found
Jan 1 01:00:21 gbquadplus user.info kernel: hub 7-0:1.0: 1 port detected
Jan 1 01:00:21 gbquadplus user.info kernel: ohci-brcm ohci-brcm.3: Broadcom STB OHCI
Jan 1 01:00:21 gbquadplus user.info kernel: ohci-brcm ohci-brcm.3: new USB bus registered, assigned bus number 8
Jan 1 01:00:21 gbquadplus user.info kernel: ohci-brcm ohci-brcm.3: irq 77, io mem 0x10490600
Jan 1 01:00:21 gbquadplus user.info kernel: hub 8-0:1.0: USB hub found
Jan 1 01:00:21 gbquadplus user.info kernel: hub 8-0:1.0: 1 port detected
Jan 1 01:00:21 gbquadplus user.info kernel: usbcore: registered new interface driver usb-storage
Jan 1 01:00:21 gbquadplus user.info kernel: mousedev: PS/2 mouse device common for all mice
Jan 1 01:00:21 gbquadplus user.info kernel: i2c /dev entries driver
Jan 1 01:00:21 gbquadplus user.info kernel: usbcore: registered new interface driver btusb
Jan 1 01:00:21 gbquadplus user.info kernel: hidraw: raw HID events driver (C) Jiri Kosina
Jan 1 01:00:21 gbquadplus user.info kernel: usbcore: registered new interface driver usbhid
Jan 1 01:00:21 gbquadplus user.info kernel: usbhid: USB HID core driver
Jan 1 01:00:21 gbquadplus user.info kernel: TCP: cubic registered
Jan 1 01:00:21 gbquadplus user.info kernel: NET: Registered protocol family 10
Jan 1 01:00:21 gbquadplus user.info kernel: NET: Registered protocol family 17
Jan 1 01:00:21 gbquadplus user.info kernel: Bluetooth: HIDP (Human Interface Emulation) ver 1.2
Jan 1 01:00:21 gbquadplus user.info kernel: Bluetooth: HIDP socket layer initialized
Jan 1 01:00:21 gbquadplus user.info kernel: l2tp_core: L2TP core driver, V2.0
Jan 1 01:00:21 gbquadplus user.notice kernel: Key type dns_resolver registered
Jan 1 01:00:21 gbquadplus user.info kernel: PM: CP0 COUNT/COMPARE frequency does not depend on divisor
Jan 1 01:00:21 gbquadplus user.info kernel: EBI CS0: setting up NAND flash (primary)
Jan 1 01:00:21 gbquadplus user.info kernel: nand: device found, Manufacturer ID: 0x01, Chip ID: 0xdc
Jan 1 01:00:21 gbquadplus user.info kernel: nand: AMD/Spansion S34ML04G1
Jan 1 01:00:21 gbquadplus user.info kernel: nand: 512MiB, SLC, page size: 2048, OOB size: 64
Jan 1 01:00:21 gbquadplus user.info kernel: nand: device found, Manufacturer ID: 0x01, Chip ID: 0xdc
Jan 1 01:00:21 gbquadplus user.info kernel: nand: AMD/Spansion S34ML04G1
Jan 1 01:00:21 gbquadplus user.info kernel: nand: 512MiB, SLC, page size: 2048, OOB size: 64
Jan 1 01:00:21 gbquadplus user.info kernel: brcmnand brcmnand.0: 512MiB total, 128KiB blocks, 2KiB pages, 16B OOB, 8-bit, Hamming ECC
Jan 1 01:00:21 gbquadplus user.info kernel: Bad block table found at page 262080, version 0x01
Jan 1 01:00:21 gbquadplus user.info kernel: Bad block table found at page 262016, version 0x01
Jan 1 01:00:21 gbquadplus user.notice kernel: Creating 4 MTD partitions on "brcmnand.0":
Jan 1 01:00:21 gbquadplus user.notice kernel: 0x000000e00000-0x00001fc00000 : "rootfs"
Jan 1 01:00:21 gbquadplus user.notice kernel: 0x000000e00000-0x00001fc00000 : "rootfs(redundant)"
Jan 1 01:00:21 gbquadplus user.notice kernel: 0x000000200000-0x000000900000 : "kernel"
Jan 1 01:00:21 gbquadplus user.notice kernel: 0x000000900000-0x000000a00000 : "mac"
Jan 1 01:00:21 gbquadplus user.notice kernel: UBI: attaching mtd0 to ubi0
Jan 1 01:00:21 gbquadplus user.notice kernel: random: nonblocking pool is initialized
Jan 1 01:00:21 gbquadplus user.notice kernel: UBI: scanning is finished
Jan 1 01:00:21 gbquadplus user.notice kernel: UBI: attached mtd0 (name "rootfs", size 494 MiB) to ubi0
Jan 1 01:00:21 gbquadplus user.notice kernel: UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
Jan 1 01:00:21 gbquadplus user.notice kernel: UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
Jan 1 01:00:21 gbquadplus user.notice kernel: UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
Jan 1 01:00:21 gbquadplus user.notice kernel: UBI: good PEBs: 3952, bad PEBs: 0, corrupted PEBs: 0
Jan 1 01:00:21 gbquadplus user.notice kernel: UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
Jan 1 01:00:21 gbquadplus user.notice kernel: UBI: max/mean erase counter: 4/1, WL threshold: 4096, image sequence number: 207911620
Jan 1 01:00:21 gbquadplus user.notice kernel: UBI: available PEBs: 0, total reserved PEBs: 3952, PEBs reserved for bad PEB handling: 80
Jan 1 01:00:21 gbquadplus user.info kernel: ALSA device list:
Jan 1 01:00:21 gbquadplus user.info kernel: No soundcards found.
Jan 1 01:00:21 gbquadplus user.notice kernel: UBI: background thread "ubi_bgt0d" started, PID 58
Jan 1 01:00:21 gbquadplus user.notice kernel: UBIFS: background thread "ubifs_bgt0_0" started, PID 59
Jan 1 01:00:21 gbquadplus user.notice kernel: UBIFS: recovery needed
Jan 1 01:00:21 gbquadplus user.notice kernel: UBIFS: recovery completed
Jan 1 01:00:21 gbquadplus user.notice kernel: UBIFS: mounted UBI device 0, volume 0, name "rootfs"
Jan 1 01:00:21 gbquadplus user.notice kernel: UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
Jan 1 01:00:21 gbquadplus user.notice kernel: UBIFS: FS size: 489746432 bytes (467 MiB, 3857 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
Jan 1 01:00:21 gbquadplus user.notice kernel: UBIFS: reserved for root: 0 bytes (0 KiB)
Jan 1 01:00:21 gbquadplus user.notice kernel: UBIFS: media format: w4/r0 (latest is w4/r0), UUID 0D3D7BB8-4210-4C23-B3E1-000BC3667C28, small LPT model
Jan 1 01:00:21 gbquadplus user.info kernel: VFS: Mounted root (ubifs filesystem) on device 0:11.
Jan 1 01:00:21 gbquadplus user.info kernel: devtmpfs: mounted
Jan 1 01:00:21 gbquadplus user.info kernel: Freeing unused kernel memory: 276K (8089b000 - 808e0000)
Jan 1 01:00:21 gbquadplus user.info kernel: usbcore: registered new interface driver rtl8192cu
Jan 1 01:00:21 gbquadplus user.info kernel: usb 4-1: new high-speed USB device number 2 using ehci-brcm
Jan 1 01:00:21 gbquadplus user.info kernel: usb-storage 4-1:1.0: USB Mass Storage device detected
Jan 1 01:00:21 gbquadplus user.info kernel: usb-storage 4-1:1.0: Quirks match for vid 152d pid 2329: 8020
Jan 1 01:00:21 gbquadplus user.info kernel: scsi3 : usb-storage 4-1:1.0
Jan 1 01:00:21 gbquadplus user.warn kernel: version: 20150607153448-14.2
Jan 1 01:00:21 gbquadplus user.notice kernel: scsi 3:0:0:0: Direct-Access WDC WD50 00AAKS-00YGA0 PQ: 0 ANSI: 2 CCS
Jan 1 01:00:21 gbquadplus user.notice kernel: sd 3:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
Jan 1 01:00:21 gbquadplus user.notice kernel: sd 3:0:0:0: [sda] Write Protect is off
Jan 1 01:00:21 gbquadplus user.debug kernel: sd 3:0:0:0: [sda] Mode Sense: 28 00 00 00
Jan 1 01:00:21 gbquadplus user.notice kernel: sd 3:0:0:0: Attached scsi generic sg0 type 0
Jan 1 01:00:21 gbquadplus user.err kernel: sd 3:0:0:0: [sda] No Caching mode page found
Jan 1 01:00:21 gbquadplus user.err kernel: sd 3:0:0:0: [sda] Assuming drive cache: write through
Jan 1 01:00:21 gbquadplus user.err kernel: sd 3:0:0:0: [sda] No Caching mode page found
Jan 1 01:00:21 gbquadplus user.err kernel: sd 3:0:0:0: [sda] Assuming drive cache: write through
Jan 1 01:00:21 gbquadplus user.info kernel: sda: sda1
Jan 1 01:00:21 gbquadplus user.err kernel: sd 3:0:0:0: [sda] No Caching mode page found
Jan 1 01:00:21 gbquadplus user.err kernel: sd 3:0:0:0: [sda] Assuming drive cache: write through
Jan 1 01:00:21 gbquadplus user.notice kernel: sd 3:0:0:0: [sda] Attached SCSI disk
Jan 1 01:00:21 gbquadplus user.warn kernel: LCD: ILI9327
Jan 1 01:00:21 gbquadplus user.warn kernel: EXT4-fs (sda1): warning: maximal mount count reached, running e2fsck is recommended
Jan 1 01:00:21 gbquadplus user.info kernel: EXT4-fs (sda1): recovery complete
Jan 1 01:00:21 gbquadplus user.info kernel: EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
Jan 1 01:00:21 gbquadplus user.info kernel: input: gigablue remote control as /devices/virtual/input/input0
Jan 1 01:00:21 gbquadplus user.info kernel: DVB: registering new adapter (gbquadplus)
Jan 1 01:00:21 gbquadplus user.info kernel: dvb dvb.0: DVB: registering adapter 0 frontend 0 (BCM7346 DVB-S2 NIM (internal))...
Jan 1 01:00:21 gbquadplus user.info kernel: dvb dvb.0: DVB: registering adapter 0 frontend 0 (BCM7346 DVB-S2 NIM (internal))...
Jan 1 01:00:21 gbquadplus user.info kernel: dvb dvb.0: DVB: registering adapter 0 frontend 0 (GIGA DVB-C/T2 NIM (SI4768))...
Jan 1 01:00:21 gbquadplus user.info kernel: dvb dvb.0: DVB: registering adapter 0 frontend 0 (GIGA DVB-C/T2 NIM (SI4768))...

Vielleicht steht hier der Fehler.
Danke

SonyFan · 14. Feb. 2016

Auf welche Quelle springt denn dein Medion TV um? Ich sehe die Problematik nicht unbedingt an der Gigablue.
Du schreibst das du den Bluescreen am TV bekommst. OK..Logischerweise meistens wenn der TV auf eine Quelle umspringt an der nix angeschlossen ist!
Bevor du wieder auf HDMI schaltest...Auf welcher Source steht denn dann der Medion TV?
Sollte deine Gigablue an einem HDMI/MHL Port angeschlossen sein, würde ich mal einen anderen Port verwenden insofern an deinem TV vorhanden

Eidi · 14. Feb. 2016

Viele Fernseher haben den sogenannten "Hotel-Modus". Damit kannst Du z.B. auch einstellen, dass das
Gerät immer mit z.B. HDMI3 startet.

Bei meinem Panasonic-Viera hab' ich das auch gemacht. HDMI1 ist der Master beim Starten.

Googel mal, ob's für Deinen TV auch die Möglichkeit gibt. Wenn ja, die verschiedenen Ports ausprobieren.

MfG

patchmatch · 14. Feb. 2016

Du solltest auch mal ausprobieren, ob es am HDMI Kabel liegt. Also einfach mal ein anderes Kabel ausprobieren.

MfG

patchmatch

haiflosse · 14. Feb. 2016

Danke für die Antworten. Werde mal den anderen hdmi Eingang testen.
Danke

Medion tv und Sat Receiver per hdmi plötzlich nur blaues Bild gelöst

haiflosse

Dracul1593

haiflosse

SonyFan

Eidi

patchmatch

haiflosse