Hallo,
habe mir dieses Spiel heute geladen und installiert beim starten des Spiels kommt dieses Underworld Setup. Auch nach dem ich die Einstellungen so gering wie möglich eingestellt habe kommt die Fehlermeldung die wie folgt lautet:
"Direct3D konnte mit den aktuellen Einstellungen nicht initialisiert werden" .
habe nun folgendes gemacht:
Start-Ausführen-dxdiag-
in diesem Fenster alles aktiviert und gestestet und es folgte keine Fehlermeldung. Ich kopiere mal hier meine PC Konfiguration etc.:
Microsoft Windows XP SP 2
Mainboard: Asus A7N8X-E
Award BIOS 6.00
AMD Athlon XP 2800+ MMX 3DNow
1024 MB RAM Dual Channel
ATI Radeon 9800 Professional 256 MB
DirectDraw und Direct3D aktiviert und getestet-OK
Hier nochmal ein Auszug:
So jetzt weis nicht weiter.
kann mir jemand helfen?
Es ist mir schon klar das es ein älteres System ist, mich macht nur stutzig wegen der 3D Fehlermeldung, das das Spiel gar nicht startet-hmmmmm schade.
Vielne Dank schon mal.
mfg
Edit heute 17.11.: Na da muss ich wohl noch etwas warten.-Gedult
habe mir dieses Spiel heute geladen und installiert beim starten des Spiels kommt dieses Underworld Setup. Auch nach dem ich die Einstellungen so gering wie möglich eingestellt habe kommt die Fehlermeldung die wie folgt lautet:
"Direct3D konnte mit den aktuellen Einstellungen nicht initialisiert werden" .
habe nun folgendes gemacht:
Start-Ausführen-dxdiag-
in diesem Fenster alles aktiviert und gestestet und es folgte keine Fehlermeldung. Ich kopiere mal hier meine PC Konfiguration etc.:
Microsoft Windows XP SP 2
Mainboard: Asus A7N8X-E
Award BIOS 6.00
AMD Athlon XP 2800+ MMX 3DNow
1024 MB RAM Dual Channel
ATI Radeon 9800 Professional 256 MB
DirectDraw und Direct3D aktiviert und getestet-OK
Hier nochmal ein Auszug:
------------------
System Information
------------------
Time of this report: 11/16/2008, 20:44:46
Machine name:
Operating System: Windows XP Professional (5.1, Build 2600) Service Pack 2 (2600.xpsp_sp2_qfe.080814-1242)
Language: German (Regional Setting: German)
System Manufacturer: ASUSTeK Computer INC.
System Model: A7N8X-E
BIOS: Phoenix - AwardBIOS v6.00PG
Processor: AMD Athlon(tm) XP 2800+, MMX, 3DNow, ~2.1GHz
Memory: 1024MB RAM
Page File: 474MB used, 1987MB available
Windows Dir: C:\WINDOWS
DirectX Version: DirectX 9.0c (4.09.0000.0904)
DX Setup Parameters: Not found
DxDiag Version: 5.03.2600.2180 32bit Unicode
------------
DxDiag Notes
------------
DirectX Files Tab: No problems found.
Display Tab 1: No problems found. DirectDraw test results: All tests were successful. Direct3D 7 test results: All tests were successful. Direct3D 8 test results: All tests were successful. Direct3D 9 test results: All tests were successful.
Sound Tab 1: No problems found.
Music Tab: No problems found.
Input Tab: No problems found.
Network Tab: No problems found.
--------------------
DirectX Debug Levels
--------------------
Direct3D: 0/4 (n/a)
DirectDraw: 0/4 (retail)
DirectInput: 0/5 (n/a)
DirectMusic: 0/5 (n/a)
DirectPlay: 0/9 (retail)
DirectSound: 0/5 (retail)
DirectShow: 0/6 (retail)
---------------
Display Devices
---------------
Card name: RADEON 9800 SERIES
Manufacturer: ATI Technologies Inc.
Chip type: ATI Radeon Graphics Processor AGP (0x4E48)
DAC type: Internal DAC(400MHz)
Device Key: Enum\PCI\VEN_1002&DEV_4E48&SUBSYS_4E481FD3&REV_00
Display Memory: 256.0 MB
Current Mode: 1280 x 1024 (32 bit) (60Hz)
Monitor: BZ 114623Philips 190C
Monitor Max Res:
Driver Name: ati2dvag.dll
Driver Version: 6.14.0010.6879 (English)
DDI Version: 9 (or higher)
Driver Attributes: Final Retail
Driver Date/Size: 10/29/2008 03:22:02, 314880 bytes
WHQL Logo'd: Yes
WHQL Date Stamp: n/a
VDD: Nicht zutreffend
Mini VDD: ati2mtag.sys
Mini VDD Date: 10/29/2008 04:10:58, 3341824 bytes
Device Identifier: {D7B71EE2-0D08-11CF-BC66-426EA1C2CB35}
Vendor ID: 0x1002
Device ID: 0x4E48
SubSys ID: 0x4E481FD3
Revision ID: 0x0000
Revision ID: 0x0000
Video Accel:
Deinterlace Caps: n/a
Registry: OK
DDraw Status: Enabled
D3D Status: Enabled
AGP Status: Not Available
DDraw Test Result: All tests were successful.
D3D7 Test Result: All tests were successful.
D3D8 Test Result: All tests were successful.
D3D9 Test Result: All tests were successful.
So jetzt weis nicht weiter.
kann mir jemand helfen?
Es ist mir schon klar das es ein älteres System ist, mich macht nur stutzig wegen der 3D Fehlermeldung, das das Spiel gar nicht startet-hmmmmm schade.
Vielne Dank schon mal.
mfg
Edit heute 17.11.: Na da muss ich wohl noch etwas warten.-Gedult
Zuletzt bearbeitet von einem Moderator: