Habe genau oben genanntes Problem und möchte gerne wissen, woran es liegt. Da will man einmal ne DL-DVD brennen und prompt wird sie verheizt. :mad:
Es handelt sich um einen Traxdata 2,4x und 8,5 GB DL Rohling. Nero bricht nach kurzer Zeit ab und wirft folgende Log aus:
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Programme\Nero\Nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 28.07.2004 16:51:12
Nero Version: 6.6.0.1
Recorder: <LITE-ON DVDRW SOHW-1673S>Version: JS01 - HA 1 TA 1 - 6.6.0.1
Adapter driver: <nvatabus> HA 1
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ?
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
CD-ROM: <LITE-ON DVDRW SOHW-1673S>Version: JS01 - HA 1 TA 1 - 6.6.0.1
Adapter driver: <nvatabus> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : ST3120026AS 3.05 si3112r Port 0 ID 0 DMA: Off
CdRomPeripheral : LITE-ON DVDRW SOHW-1673S nvatabus Port 1 ID 1 DMA: Off
DiskPeripheral : QUANTUM FIREBALL CR13.0A nvatabus Port 1 ID 2 DMA: Off
=== CDRom-Device-Map ===
LITE-ON DVDRW SOHW-1673S E: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1023MB (1048048kB)
Free physical memory: 556MB (569504kB)
Memory in use : 45 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
2.5.2006
ISO Zusammenstellung
18:02:04 #1 Text 0 File Isodoc.cpp, Line 6165
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
18:02:04 #2 Text 0 File Reader.cpp, Line 127
Reader running
18:02:04 #3 Text 0 File Writer.cpp, Line 122
Writer LITE-ON DVDRW SOHW-1673S running
18:02:04 #4 ISO9660GEN -11 File geniso.cpp, Line 3286
First writeable address = 0 (0x00000000)
18:02:04 #5 Text 0 File Burncd.cpp, Line 3117
Turn on Disc-at-Once, using DVD media
18:02:05 #6 Text 0 File DlgWaitCD.cpp, Line 256
Last possible write address on media: 4173823 (927:30.73, 8151MB)
Last address to be written: 4132351 (918:18.01, 8070MB)
18:02:05 #7 Text 0 File DlgWaitCD.cpp, Line 268
Write in overburning mode: NO (enabled: CD)
18:02:05 #8 Text 0 File DlgWaitCD.cpp, Line 2309
Recorder: LITE-ON DVDRW SOHW-1673S, Media type: DVD+R9 Double Layer
Disc Manufacturer ID: RICOHJPN, Media Type ID: D00, Product revision number: 1
Disc Application Code: 0, Extended Information Indicators: 0
18:02:05 #9 Text 0 File DlgWaitCD.cpp, Line 430
>>> Protocol of DlgWaitCD activities: <<<
=========================================
18:02:05 #10 Text 0 File ThreadedTransferInterface.cpp, Line 844
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 4132352 (4132352) = #4132352/918:18.2
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 4132352 blocks [LITE-ON DVDRW SOHW-1673S]
--------------------------------------------------------------
18:02:05 #11 Text 0 File ThreadedTransferInterface.cpp, Line 1047
Prepare recorder [LITE-ON DVDRW SOHW-1673S] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 8463056896, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
4132352 | lead-out | 1 | 0x00 | 0x41
18:02:05 #12 Phase 24 File dlgbrnst.cpp, Line 1853
Caching of files started
18:02:05 #13 Text 0 File Burncd.cpp, Line 4003
Cache writing successful.
18:02:05 #14 Phase 25 File dlgbrnst.cpp, Line 1853
Caching of files completed
18:02:05 #15 Phase 36 File dlgbrnst.cpp, Line 1853
Burn process started at 2,4x (3.324 KB/s)
18:02:05 #16 Text 0 File ThreadedTransferInterface.cpp, Line 2497
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
18:02:05 #17 Text 0 File DVDPlusDualLayer.cpp, Line 397
Disc finalized, LBA total Image size: 4132352 (8071MB), Last LBA L0: 2066191 (4035MB)
18:02:46 #18 Text 0 File DVDPlusDualLayer.cpp, Line 481
L0 Data Zone Capacity set to 2066192 (1F8710h, 4035MB) -> OK, confirmed setting
18:02:46 #19 CDR -1205 File DVDPlusDualLayer.cpp, Line 506
Burning Layer 1
18:02:46 #20 Text 0 File DVDPlusDualLayer.cpp, Line 514
Start writing layer 1 at address 0 (0h)
18:02:46 #21 Text 0 File Cdrdrv.cpp, Line 8281
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R DL (14), Part Version: 1
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 2, Track Path: Opposite Track Path (OTP), Layer Type: recordable
Linear Density: 0,293 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: FCFFFF h
End Sector Number in Layer 0: 22870F h
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 0 h
Disc Manufacturer ID: RICOHJPN
Media type ID: D00
Product revision number: 1
Number of Physical format information bytes in use in ADIP up to byte 63: 64
Media Specific [16..63]:
00 00 00 52 49 43 4F 48 - 4A 50 4E 44 30 30 01 40 ...RICOHJPND00.@
25 25 37 11 00 34 64 00 - 34 64 20 21 0C 0D 12 12 %%7..4d.4d.!....
02 01 01 10 00 20 21 0C - 0D 12 12 02 01 01 10 00 ......!.........
18:02:46 #22 Text 0 File dlgbrnst.cpp, Line 1711
Set remaining time: 42:16,966 (2536966ms) -> OK
18:02:46 #23 Text 0 File DVDPlusRW.cpp, Line 632
Start write address at LBA 0
DVD high compatibility mode: Yes
18:02:57 #24 SCSI -1135 File Cdrdrv.cpp, Line 1432
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x032C0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x00 0x0D 0xE0 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x0C 0x00
18:02:57 #25 CDR -1135 File Writer.cpp, Line 311
Write error
18:02:57 #26 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion
18:02:57 #27 Text 0 File ThreadedTransfer.cpp, Line 223
conversion idle, stopping reader
18:02:57 #28 Phase 127 File dlgbrnst.cpp, Line 1853
Generating DVD high compatibility borders
18:02:57 #29 Text 0 File dlgbrnst.cpp, Line 1711
Set remaining time: 0:00,000 (0ms) -> OK
18:02:57 #30 Phase 129 File dlgbrnst.cpp, Line 1853
Generating DVD borders completed successfully
18:02:57 #31 Text 0 File dlgbrnst.cpp, Line 1711
Set remaining time: 0:00,000 (0ms) -> OK
18:02:57 #32 Phase 38 File dlgbrnst.cpp, Line 1853
Burn process failed at 2,4x (3.324 KB/s)
Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.02.62a, size=20016 bytes, created 28.10.2003 12:02:00 (Prassi/Veritas driver for win 2K)
File 'Drivers\nvatabus.sys': Ver=5.10.2600.0446 built by: WinDDK, size=79360 bytes, created 03.06.2004 10:40:46 (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Kann mir jemand verraten, wo genau der Fehler liegt ?
Danke schonmal im Voraus !
Gruß
Batman(U)